Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
If this pole saw is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase. WARRANTY SERVICE IS AVAILABLE BY RETURNING THIS POLE SAW TO THE NEAREST MTD REPAIR DEALER. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 1 RULES FOR SAFE OPERATION RULES FOR SAFE OPERATION SYMBOL MEANING The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and their explanations, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures. SYMBOL MEANING Failure to obey a safety warning will result in serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. DANGER: Failure to obey a safety warning can result in injury to yourself and others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. WARNING: Indicates danger, warn- ing or cau- tion. Attention is required in order to avoid serious personal injury. May be used in conjunction with other symbols or pic- tographs. SAFETY ALERT: NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment. Read the Operator’s Manual(s) and follow all warnings and safety instructions. Failure to do so can result in serious injury to the operator and/or bystanders. Failure to obey a safety CAUTION: warning may result in property damage or personal injury to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury. • IMPORTANT SAFETY INSTRUCTIONS • READ ALL INSTRUCTIONS BEFORE OPERATING • Read the instructions carefully. Be familiar with the controls and proper use of the unit. When using the unit, safety rules. Please read these instructions before operating the unit in order to ensure the safety of the operator and any bystanders. Please keep these instructions for later use. WARNING: • Carefully inspect the area before starting the unit. Remove all debris and hard or sharp objects such as glass, wire, etc. • Clear the area of children, bystanders, and pets. At a minimum, keep all children, bystanders, and pets outside a 50 feet (15m.) radius; there still may be a risk to bystanders from thrown objects. Bystanders should be encouraged to wear eye protection. If you are approached, stop the unit immediately. • Do not operate this unit when tired, ill or under the influence of alcohol, drugs or medication. • Children must not operate the unit. Teens must be accompanied and guided by an adult. • All guards and safety attachments must be installed properly before operating the unit. • Inspect the unit before use. Replace damaged parts. Make sure all fasteners are in place and secure. Replace parts that are cracked, chipped or damaged in any way. Do not operate the unit with loose or damaged parts. 2 RULES FOR SAFE OPERATION RULES FOR SAFE OPERATION • Do not operate a chain saw that is damaged, improperly adjusted, or not completely and securely assembled. Be sure that the saw’s chain stops moving when the throttle control trigger is released. • Shut off the motor before setting the chain saw down. • Use extreme caution when cutting small-sized brush and saplings because slender material may catch the chain saw and whip towards you or pull you off balance. • When cutting a limb that is under tension, be alert for springback so that you will not be struck when the tension in the wood fibers is released • Do not cut through nails, rods in the tree, railroad ties or pallets. Inspect a tree that you are going to cut for foreign objects that could cause injury or damage to your chain saw. • After striking a foreign object, stop the engine and thoroughly inspect for damage. Repair as necessary. • Keep the handles dry, clean and free of the oil/fuel mixture • We do not recommend using the chain saw in a tree or on a ladder. • All chain saw service, other that the items listed in this instruction manual maintenance instructions, should be performed by competent chain saw service personnel. • Use the right tool. Only use this chain saw for its intended purpose, to cut wood. • Do not overreach. Always keep proper footing and balance. • Always hold the unit with both hands when operating. Keep a firm grip on all handles or grips. • Never touch the chain or attempt to service the saw while the engine is running. Make sure all moving parts have stopped. Allow the chain saw to cool, as the chain can be hot. • Check the bar and chain at frequent intervals for proper adjustment. Make sure the bar and chain are properly tightened and sharpened. Visually inspect for damage. Repair any damage before restarting or operating the chain saw. KICKBACK SAFETY PRECAUTIONS KICKB...