Assessments - 5, GPA: 3.4 ( )

Fabricante : Makita Arquivo Tamanho: 1.22 mb Arquivo Nome : Língua de Ensino:

These receipts and maintenance records should be transferred to each subsequent owner of the engine. MAKITA reserves the right to deny warranty coverage if the engine has not been properly maintained. Warranty claims will not be denied, however, solely because of the lack of required maintenance or failure to keep maintenance records. MAINTENANCE, REPLACEMENT OR REPAIR OF EMISSION CONTROL DEVICES AND SYSTEMS MAY BE PERFORMED BY ANY REPAIR ESTABLISHMENT OR INDIVIDUAL; HOWEVER, WARRANTY REPAIRS MUST BE PERFORMED BY A SERVICE DEALER AUTHORIZED BY MAKITA. THE USE OF PARTS THAT ARE NOT EQUIVALENT IN PERFORMANCE AND DURABILITY TO AUTHORIZED PARTS MAY IMPAIR THE EFFECTIVENESS OF THE EMISSION CONTROL SYSTEM AND MAY HAVE A BEARING ON THE OUTCOME OF A WARRANTY CLAIM. If other than the parts authorized by MAKITA are used for maintenance replacements or for the repair of components affecting emission control, you should assure yourself that such parts are warranted by their manufacturer to be equivalent to the parts authorized by MAKITA in their performance and durability. HOW TO MAKE A CLAIM All repair qualifying under this limited warranty must be performed by a service dealer authorized by MAKITA. In the event that any emission- related part is found to be defective during the warranty period, you shall notify MAKITA at the following contacts and you will be advised of the appropriate warranty service dealer or service providers where the warranty repair can be performed. * For the nearest Makita service center , please visit * For technical support or questions regarding operation of our tools and accessories call: 1-800-4-MAKITA * Makita USA Inc. Corporate Office : 14930 Northam St. La Mirada, CA 90638-5753 (For Canada) * For the authorized service centre nearest you please refer to the local yellow pages directory under “tools”, or contact our customer service department Tel 1-800-263-3734 (Canada only), or visit our web site * Makita Canada Inc. Head Office & Plant : 1950 Forbes Street, Whitby, ON L1N 7B7 3 Symbols You will note the following symbols when reading the instruction manual. Read instruction Manual Wear eye and ear protection (for String trimmer only) Take Particular care and Attention Wear protective helmet, eye and ear protection (for Brush Cutter only) Forbidden Do not use metal blades (for String trimmer only) Keep distance Top permissible tool speed Flying object hazard Fuel and oil mixture No smoking Engine-Manual start No open flame STOP Emergency stop Protective gloves must be worn First Aid Kickback RE Y Recycling Keep the area of operation clear of all persons and pets ON/START Wear sturdy boots with nonslip soles. Sleeltoed safety boots are recommended. OFF/STOP 4 5 SAFETY INSTRUCTIONS General Instructions - To ensure correct operation, user has to read this instruction manual to make himself familiar with the handling of the Brush Cutter/String Trimmer. Users insufficiently informed will risk danger to themselves as well as others due to improper handling. - It is recommended only to lend the Brush Cutter/String Trimmer to people who have proven to be experienced with Brush Cutter/String Trimmer. Always hand over the instruction manual. - First users should ask the dealer for basic instructions to familiarize oneself with the handling of an engine powered cutter. - Children and young persons aged under 18 years must not be allowed to operate the Brush Cutter/String Trimmer. Persons over the age of 16 years may however use the device for the purpose of being trained only whilst under supervision of a qualified trainer. - Use Brush Cutter/String Trimmer with the utmost care and attention. - Operate the Brush Cutter/String Trimmers only if you are in good physical condition. Perform all work calmly and carefully. The user has to accept liability for others. - Never use the Brush Cutter/String Trimmer after consumption of alcohol or drugs, or if feeling tired or ill. Intended use of the machine The Brush Cutter/String Trimmer is only intended for cutting grass, weeds, bushes, undergrowth. It should not be used for any other purpose such as edging or hedge cutting as this may cause injury. Personal protective equipment - The clothing worn should be functional and appropriate, i.e. it should be tight-fitting but not cause hindrance. Do not wear either jewelry or clothing which could become entangled with bushes or shrubs. - In order to avoid either head-, eye-, hand-or foot injuries as well as to protect your hearing, the following protective equipment and protective clothing must be used during operation of the Brush Cutter/String Trimmer. - Always wear a helmet where there is a risk of falling objects. The protective helmet (1) is to be checked at regular intervals for damage and is to be replaced at the latest after 5 years. Use only approved protective helmets. - The visor (2) of the helmet ( or goggles ) protects the face from flying debris and stones. Dur...

Baixe o seu

Para fazer o download, introduza 2 dígitos :