Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
WARNING IMPORTANT • Never touch the cylinder, muffler, or spark plugs with your bare hands immediately after stopping the engine. The engine can become very hot when in operation, and doing so could result in severe burns. • When checking the machine to make sure that it is okay before using it, check the area around the muffler and remove any wood chips or leaves which have attached themselves to the brushcutter. Failing to do so could cause the muffler to become overheated, and • Note that using any spark plug other than those designated may result in the engine failing to operate properly or in the engine becoming overheated and damaged. • To install the spark plug, first turn the plug until it is finger tight, then tighten it a quarter turn more with a socket wrench. TIGHTENING TORQUE: 87~104 in-lbs (9.8~11.8 N.m.) US-15 BCZ2450S/T 9. Maintenance that this in turn could cause the engine to catch on fire. Always make sure that the muffler is clean and free of wood chips, leaves, and other waste before use. • Check the intake air cooling vent and the area around the cylinder cooling fins after every 25 hours of use for blockage, and remove any waste which has attached itself to the brushcutter. Note that it is necessary to remove the engine cover shown in (MA7) in order to be able to view the upper part of the cylinder. IMPORTANT MA8 ¦ PROCEDURES TO BE PERFORMED AFTER EVERY 100 HOURS OF USE 1. Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent and cylinder exhaust port at the same time. 2. Tighten all screws, bolts, and fittings. 3. Check to see if any oil or grease has worked its way in between the clutch lining and drum, and if it has wipe it away using oil-free, lead-free gasoline. (1) (2) MA7 10. Storage • If waste gets stuck and causes blockage around the intake air cooling vent or between the cylinder fins, it may cause the engine to overheat, and that in turn may cause mechanical failure on the part of the brushcutter. (MA7) (1) cylinder (2) intake air cooling vent (back) • Aged fuel is one of major causes of engine starting failure. Before storing the unit, empty the fuel tank and run the engine until it uses all the fuel left in the fuel line and the carburetor. Store the unit indoor taking necessary measures for rust prevention. 11. Disposal • When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations. US-16 BCZ2450S/T 12. Optional blade usage (for BCZ2450S only) WARNING [ BCZ2450T ] This trimmer is designed for use as a trimmer only. Metal blades should never be used on this trimmer. WARNING •When sharpening, removing, or reattaching the blade, be sure to wear thick, sturdy gloves and use only proper tools and equipment to prevent injury. ¦ CHOOSE THE BLADE Choose a suitable recommended cutting attachment according to the object to be cut. (OPT4) • When replacing blade always be sure to use products which have been certified by RedMax. U S OPT1 OPT2 OPT3 WARNING • For security reason, in case of mounting the blade on this product and use it, purchase the blade kit (T3195-94000) and change guard, handle from the original ones, and use shoulder strap. (1) Shoulder strap : T3300-17100 IMPORTANT Change to the debris guard which is suitable for the metal blade. (OPT2) TIGHTENING TORQUE : 130~174 in-lbs (14.7~19.6 N.m.) (1) Guard-A : 5764-24000 (2) Guard : 5766-24110 (3) Bracket : 3250-24120 (4) Bolt : 0225-10620 (5) Screw : 0263-30614 (6) Nut : 0280-10605 IMPORTANT Change the loop handle to the J-handle for safe operation. (OPT3) (1) Bracket : 3583-14101 (2) J-handle : 6367-14200 OPT4 (1) (2) (3) (4) (5) (6) (7) (A) (B) (C) (D) (1) 9” 22-tooth : SST229 (2) 9” 24-tooth : SST249 (3) 8” 8-tooth : SGB088 (4) 9” 8-tooth : SGB089 (5) 8” 4-tooth : SGB048 (6) 9” 4-tooth : SGB049 (7) Nylon line head (A) Under growth (B) Heavy weeds (C) Light weeds (D) Grass (1) (3) (2) OPT5 ¦ SET UP THE BLADE 1. Detach the line head assembly. (OPT5) 2. Put on the blade, making the marked side face the shaft side, put the holder and the cover on, and fasten the blade with the nut. (OPT5) (1) Cover : 3540-13283 (2) Holder (B) : 6019-13250 (STANDARD) (3) Nut : T3002-13260 (STANDARD) OPT6 ¦ BALANCE UNIT 1. Put on strap and attach unit to strap. 2. Slide clamp up or down until unit balances with head just touching on the ground. (OPT6) US-17 BCZ2450S/T 12. Optional blade usage (for BCZ2450S only) ¦ STARTING THE ENGINE Please refer 5.For safe operation (P.6), 8.Operation (P.12). WARNING OPT7 • The product is equipped with a centrifugal clutch mechanism, so the cutting attachment could rotate as soon as the engine is started. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into contact with any obstacle when the engine starts. (OPT7) ¦ CUTTING METHOD a) Use the front left ...
Este manual também é adequado para os modelos :Ferramentas para Jardim - BCZ2450S (1.43 mb)