Assessments - 3, GPA: 3 ( )

Fabricante : McCulloch Arquivo Tamanho: 491.8 kb Arquivo Nome : MOEN2003_530248729.pdf Língua de Ensino:

except the 24-80 tooth blade. Line cutter blade Follow the fitting instructions carefully. (L): assemble as illustrated. N.B: Saw tooth blades (24 - 80 tooth) have a 2) When using a saw tooth blade (optional central base diametre of 20mm and therefore accessory), the correct guard must be fitted (P/N require the use of the appropriate size top flange 240553). to ensure a correct fit. The part number is A double shoulder harness must also be worn. detailed in the cutting attachment summary chart. F. BLADE AND NYLON STRING HEAD ASSEMBLY Assemble the correct guard to suit the kind of Fixed mower gauge - f) Blade locking screw blade or nylon string head to be used (See (length mm 16). section: SAFETY GUARD ASSEMBLY). 2) If you want to assemble the rotating mower 1) Assemble blade as illustrated: gauge,proceed asillustrated: a) Flange guard - b) Upper cap with blade a) Flange guard - b) Upper cap with blade centering - c) Blade with text and directional centering - c) Blade with text and directional arrow facing upwards - d) Lower washer - e) arrow facing upwards - d) Lower washer - e) A Spacer - f) Rotating mower gauge - g) Blade locking screw (length mm 34,5). Replace the blade attachment bolt if damaged in any way. 3) Make sure that the blade bore opening fits perfectly around the centering collar on the upper cap. Tighten counterclockwise. While tightening, the blade assembly can be held fast by inserting the wrench or the screwdriver supplied into the cap and gearcase holes. To do this, rotate the cap intil the two holes coincide. 4) Assemble nylon string head as illustrated: a) Flange guard - b) Upper cap - c) Guard d) Nylon string head Tighten counterclockwise. 5) While tightening, the head assembly can be held fast by inserting the wrench or the screwdriver supplied into the holes as already shown for blade assembly. WARNING: Please do not use the accessory nylon string head guard (item C Fig. 4 F) together with metal blades. G. ENGINE/SHAFT ASSEMBLY DANGER. Do not run engine without shaft attached as clutch could fly off. 1) Assemble the engine onto the shaft. Make sure the shaft is fully and correctly engaged up to the shank, then tighten the 2 screws (A) in a criss-cross sequence. 2) Fit the end of the trigger cable connector (B) into the slot on swivel (C). H. HANDLE ASSEMBLY 1) DOUBLE HANDLE Adjust and secure double handle clamp 40 cm from engine/shaft joint by tightening the screws (C). 2) DELTA FRONT HANDLE Secure the handle in front of the label placed on the shaft 11 cm from the rear grip when 3) Adjust the screw (D) of the trigger cable connector so that the cable can easily slide in the opening with a play of 1 mm before operating the swivel (C). Tighten now the hexagonal nut (E). 4A) Stop switch (STOP) cable: fit the connection. 4B) Earth lead: connect as illustrated. assembling nylon string head and 36 cm when assembling metallic blades. This position ensures optimum balance and safety. The handle must be perpendicular to the shaf...

Baixe o seu

Para fazer o download, introduza 2 dígitos :