Assessments - 4, GPA: 4
(
)
)
|
Facilidade de uso
Inspect for broken, missing or improperly installed parts or attachments. NEVER extend trimming line beyond the length specified for your unit. ALWAYS keep the unit as clean as practical. Keep it free of loose vegetation, mud, etc. ALWAYS hold the unit firmly with both hands when cutting or trimming, and maintain control at all times. ALWAYS keep the handles clean. ALWAYS disconnect the spark plug wire before performing any maintenance work. ALWAYS, if a saw blade should bind fast in a cut, shut off the engine immediately. Push the branch or tree to ease the bind and free the blade. Wear hearing protection devices and a broad-brimmed hat or helmet. Wear close-fitting clothing to protect legs and arms. Gloves offer added protection and are strongly recommended. Do not wear clothing or jewelry that could get caught in machinery or underbrush. Secure hair so it is above shoulder level. NEVER wear shorts! Always wear eye protection such as goggles or safety glasses. Always operate with both hands firmly gripping the unit. Always make sure the appropriate cutting attachment shield is correctly installed and in good condition. Keep away from the rotating trimmer line or blade at all times, and never lift a moving attachment above waist-high. Keep a proper footing and do not overreach— maintain your balance at all times during operation. Wear appropriate footwear (non-skid boots or shoes): do not wear open-toed shoes or sandals. Never operate the unit while barefoot! Always wear a shoulder strap or a harness when operating a unit equipped with a blade. Figure 1 Be Aware of the Working Environment Make sure bystanders or observers outside the 50-foot “danger zone” wear eye protection. Avoid long-term operation in very hot or very cold weather. 50 FEET Reduce the risk of bystanders being struck by flying debris. Make sure no one is within 50 feet (15 meters)—that’s about 16 paces—of an operating attachment. When operating in rocky terrain or near electric wires or fences, use extreme caution to avoid contacting such items with the cutting attachment. Always make sure the appropriate cutting attachment shield is correctly installed. Be extremely careful of slippery terrain, especially during rainy weather. If contact is made with a hard object, stop the engine and inspect the cutting attachment for damage. Be constantly alert for objects and debris that could be thrown either from the rotating cutting attachment or bounced from a hard surface. Figure 2 Safety Labels This label indicates the minimum distance between front handle and rear grip per ANSI B175.3. C242 IMPORTANT! Safety and Operation Information Labels: Make sure all information labels are undamaged and readable. Immediately replace damaged or missing information labels. New labels are available from your local authorized Shindaiwa dealer. Figure 3 Product Description C242 BRUSHCUTTER Throttle Interlock Spark Plug Ignition Switch Muffler Strap Throttle Trigger Hanger Fuel Tank Outer Tube Using the accompanying illustrations as a guide, familiarize yourself with this unit and its various components. Understanding your unit helps ensure top performance, long service life, and safer operation. Handle Bar Gear Case Cutting Attachment Shield WARNING! Do not make unauthorized modifications or alterations to any of these units or their components. Brushcutter Blade Figure 4 Specifications C242 C242 dry weight (less attachments)....................................................12.4 lb./5.6 kg Engine model.........................................................................S242E Engine type.............................................................2 cycle catalyst Bore x stroke...................................1.3 x 1.1 in./33 mm x 28 mm Displacement......................................................1.5 cu. in./23.9 cc Maximum power.....................................................1.0 HP/0.8 kW @ 8,000 RPM (min-1) Fuel/oil ratio............................50:1 with ISO-L-EGD or JASO FC class 2-cycle mixing oil* Carburetor type.............................Walbro WYK, diaphragm-type Fuel tank capacity..................................................22.3 oz./670 ml Ignition..........................................................One-piece electronic, transistor-controlled Spark plug...............................................................NGK BPMR6A Air cleaner type.........................Non-reversible foam filter element Starting method........................................................................Recoil Stopping method ............................................................Slide switch Transmission type..............................Automatic, centrifugal clutch w/bevel gear EPA Emission Compliance Period**.......................................................Category A ** The EPA emission compliance referred to on the emission compliance label located on the engine, indicates the number of operating hours for which the engine h...
Este manual também é adequado para os modelos :Ferramentas para Jardim - 81359 (2.42 mb)
Ferramentas para Jardim - 81359 (2.42 mb)
Ferramentas para Jardim - 81359 (2.42 mb)
Ferramentas para Jardim - 81359 (2.42 mb)