Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
CAUTION: Before connecting safety ground or power cables to the connector, ensure that the power is removed from the DC circuit. To ensure that the power is off, locate the circuit breaker on the DC source circuit (usually at the power distribution of the battery distribution fuse bay). Switch the circuit breaker to the off position and, if available, install an approved safety locking device on the circuit breaker or switch. CAUTION: When stranded wiring is required, use approved wiring termination, such as closed-loop or spade-type with upturned lugs. These terminations should be the appropriate size for the wires and must be double crimped, one on the conductor and one on the insulation. CAUTION: When installing the unit, the ground connection must always be made first and disconnected last to prevent an energy hazard. CAUTION: Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available. CAUTION: The system chassis must be securely grounded to the rack cabinet frame. Do not attempt to connect power to the system until grounding cables are connected. Completed power and safety ground wiring must be inspected by a qualified electrical inspector. An energy hazard will exist if the safety ground cable is omitted or disconnected. SAFETY: Modems, Telecommunications, or Local Area Network Options • If your system includes a modem, the cable used with the modem should be manufactured with a minimum wire size of 26 American wire gauge (AWG) and an FCC-compliant RJ-11 modular plug. • Do not connect or use a modem during a lightning storm. There may be a risk of electrical shock from lightning. • Never connect or use a modem in a wet environment. • Do not plug a modem or telephone cable into the network interface controller (NIC) receptacle. • Disconnect the modem cable before opening a product enclosure, touching or installing internal components, or touching an uninsulated modem cable or jack. SAFETY: Products With Laser Devices • Do not open any panels, operate controls, make adjustments, or perform procedures on a laser device other than those specified in the product's documentation. • Only trained service technicians should repair laser devices. Product Information Guide SAFETY: When Working Inside Your System Before you remove the system covers, perform the following steps in the sequence indicated. CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. CAUTION: The memory modules can become extremely hot during operation. Allow the modules sufficient time to cool before handling. NOTICE: To help avoid possible damage to the system board, wait 5 seconds after turning off the system before removing a component from the system board or disconnecting a peripheral device. 1 Turn off the ...
Este manual também é adequado para os modelos :Canalização - AMP01 (16.84 mb)
Canalização - AND SVUA (16.84 mb)
Canalização - BMX (16.84 mb)
Canalização - ECM (16.84 mb)