Fabricante : Altinex
Arquivo Tamanho: 976 kb
Arquivo Nome : 754adbf8-be74-4ff5-9d4f-c52faeb1fe45.pdf
![en en](/images/flag/s/en.gif)
![]() |
Facilidade de uso
4. [?] This command will return general information about the Multi-Tasker™ and cards installed in the unit. Command Format: [?Ui] Ui = Unit ID (i= from 0 to 9) Example: A Multi-Tasker™ with Unit ID 1 has a front panel with part number MT101-101 and contains an MT103-122, MT103-123 and MT105-100. Send the command [?U1] and receive the following feedback: [(MT101-101U1)(MT103-122C01) (MT103-123C02)(MT105-100C05)] MT101-101U1 = Panel Number and Unit ID MT103-122C01 = An MT103-122 is in slot 1 MT103-123C02 = An MT103-123 is in slot 2 MT105-100C05 = An MT105-100 is in slot 5 5. [?C] This command will return general information about the card and its status. Command Format: [?CnUi] Cn = Card ID (n = # from 1 to max slots) Ui = Unit ID (i= from 0 to 9) Example: The MT105-100 in slot 4 has Input 1 connected to all outputs. Outputs 1-4 are on and the remainder off. Send the command [?C4] to receive feedback status similar to the following. [(MT105-100C04)(VR690-0126-014C04) (ON11110000C04)(MA0101010101010101C04)] All status feedback is enclosed in brackets, “[ ]”. Each data field within the status is enclosed in parentheses. The first two characters identify the status type. The last three characters are the card’s ID. MT105-100 = Card Model Number VR690-0126-014 = Firmware version ON11110000 = Output on/off status MA0101010101010101 = I/O connections The on/off status line is read from left to right as outputs one through eight. A “1” indicates the output is on and a “0” indicates the output is off. The I/O connections are also read left to right representing outputs one through eight and the input to which each is connected. The first two digits show the input number to which Output 1 is connected. In this case, Output 1 is connected to Input 1. The next two numbers indicate Input 1 is connected to Output 2 and so on. 6. [STA1] This command enables automatic feedback from the front panel. The command affects any card with auto-feedback capability, not just the MT105-100/101. The default at power on or reset is STA0, off. For more details, see the [?Cn] command definition. Command Format [STA1] = On Feedback Prefix Definitions: ON Output on/off status MA Matrix settings 400-0131-004 10 MULTI-TASKER™ Example: Command = [I2O*C4] Feedback = (MA0202020202020202C04) MA = Matrix Settings 0202…02 = Output connections C04 = Card ID Output Connection Description: Reading from left to right, the first two digits are for output 1, the next two for output 2, and so on. Each two digit pair represents the input number to which each output is connected. 7. [STA0] This command disables automatic feedback from the card and front panel. The command affects any card with auto-feedback capability, not just the MT105-100/101. The default at power on or reset is STA0, off. Command Format [STA0] 8. [ON] This command will enable one or more outputs for a single card, or a group of cards. SINGLE CARD OPERATION Command Format: [ONmCnUi] m = Output number (m = # from 1 to 8) Cn = Card ID (n = # from 1 to max slots) Ui = Unit ID (i = # from 0 to 9) Example: There is an MT105-100 card in slot 5. All of the outputs are off. 1) [ON1C5]: Turns on only Input 1. 2) [ON3C5]: Turns on only Input 3. Inputs 1 and 3 are now on. GROUP OPERATION This command enables output “m” for each card in group “k” of unit “i”. Command Format: [ONmGkUi] m = Output number (m = # from 1-8) Gk = Group number (k = # from 1-8) Ui = Unit ID (i = # from 0-9) Example: [ON1G1]: Turns on Output 1 for each card in Group 1. See the GROUP commands for a detailed explanation. PATH OPERATION This command will set the path for the output, but it is not active until the switch command, [SW], is executed. Commands ending in “P” are not executed immediately. The path for outputs on multiple cards, or the same card, may be preloaded. Command Format: [ONmCnUiP] m = Output number (m = # from 1 to 8) Cn = Card ID (n = slot # from 1 to max slots) Ui = Unit ID (i = # from 0 to 9) P = Path Example: There are two MT105-100 cards in slots 6 and 9. Enable Output 1 of card 6 and Output 3 of card 9 simultaneously. To do this, send the following commands: [ON1C6P] , [ON3C9P] and [SW] If “F” is included, use the [ONmCnPF] command or the [ONmCnFP] command. FEEDBACK OPERATION Command Format: [ON…..F] After processing a command, an “OK” or “[ERR001]” will be returned as feedback if “F” is included at the end of a command string. Example: [ON1C2F]: if path is not set [ON1C2PF]: if path is set 400-0131-004 11 MULTI-TASKER™ 9. [OFF] This command disables one or all outputs of a single card or a group of cards. SINGLE CARD OPERATION Command Format: [OFFmCnUi] m = Output number (m = # from 1 to 8) Cn = Card ID (n = # from 1 to max slots) Ui = Unit ID (i = # from 0 to 9) Example: Card 5 has Output 1 on. The following commands may be used to turn off the output. 1) [OFF1C5]: Turns off only Output 1. 2) [OFFC5]: Turns off all outputs. GROUP OPERATION This command disables output “m” for each card in group “k”...
Este manual também é adequado para os modelos :Equipamento de rede - MT105-101 (976 kb)