Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
• Enter your password if prompted. show modem version Example: Router# show modem version Displays the modem firmware version and datapump version. debug modem Example: Router# debug modem Displays the modem events and state transitions. show modem version Example: Router# show modem version Displays the modem firmware version, the datapump version, and the firmware log. exit Router# exit Exits privileged EXEC mode. Troubleshooting Tips Use the following debug commands to troubleshoot the modem: • debug async state • debug dialer • debug dialer forwarding • debug dialer map • debug dialer packets 6 Cisco IOS Release 12.3(7)T Cisco NM-8AM-V2 and NM-16AM-V2 Analog Modem Network Modules with V.92 How to Configure the Cisco NM-8AM-V2 and NM-16AM-V2 Network Modules • debug modem • debug ppp events • debug ppp forwarding • debug ppp negotiation • debug ppp packet Use the debug modem and debug dialer commands to troubleshoot the Cisco NM-8AM-V2 and NM-16AM-V2 network modules. Router# debug modem Router# debug dialer Router# ping 10.1.1.1 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.1.1.1, timeout is 2 seconds: *Jul 27 05:40:24.524 EST: As33 DDR: place call *Jul 27 05:40:24.524 EST: As33 DDR: Dialing cause ip (s=10.1.1.1, d=10.1.1.1) *Jul 27 05:40:24.524 EST: As33 DDR: Attempting to dial 102 *Jul 27 05:40:24.524 EST: CHAT33: Attempting async line dialer script *Jul 27 05:40:24.524 EST: CHAT33: Dialing using Modem script: dial & System script: none *Jul 27 05:40:24.524 EST: CHAT33: process started *Jul 27 05:40:24.524 EST: CHAT33: Asserting DTR *Jul 27 05:40:24.524 EST: CHAT33: Chat script dial started *Jul 27 05:40:24.524 EST: Modem 1/0 ACF: CMD DTR set high *Jul 27 05:40:24.888 EST: Modem 1/0 ACF: Event: Hook state: Off Hook Dialing. *Jul 27 05:40:24.888 EST: Modem 1/0 ACF: State: Dialing.... *Jul 27 05:40:45.960 EST: Modem 1/0 ACF: Event: CONNECT V34/LAPM/V42B/33600:TX/33600:RX *Jul 27 05:40:45.960 EST: Modem 1/0 ACF: State: Connected *Jul 27 05:40:45.972 EST: CHAT33: Chat script dial finished, status = Success *Jul 27 05:40:45.972 EST: TTY33: no timer type 1 to destroy *Jul 27 05:40:45.972 EST: TTY33: no timer type 0 to destroy *Jul 27 05:40:45.972 EST: TTY33: no timer type 2 to destroy *Jul 27 05:40:45.972 EST: Modem 1/0 ACF: CMD PPP mode active *Jul 27 05:40:47.972 EST: %LINK-3-UPDOWN: Interface Async33, changed state to up *Jul 27 05:40:47.972 EST: As33 DDR: Dialer statechange to up *Jul 27 05:40:47.972 EST: As33 DDR: Dialer call has been placed *Jul 27 05:40:47.972 EST: Modem 1/0 ACF: CMD PPP escape maps set: TX map=00000000 RX map=FFFFFFFF *Jul 27 05:40:48.112 EST: Modem 1/0 ACF: CMD PPP escape maps set: TX map=00000000 RX map=000A0000 *Jul 27 05:40:48.212 EST: As33 DDR: dialer protocol up *Jul 27 05:40:48.972 EST: %LINEPROTO-5-UPDOWN: Line protocol on Interface Async33, changed state to up Cisco IOS Release 12.3(7)T 7 Cisco NM-8AM-V2 and NM-16AM-V2 Analog Modem Network Modules with V.92 Configuration Examples for Cisco NM-8AM-V2 and NM-16AM-V2 Network Modules Configuration Examples for Cisco NM-8AM-V2 and NM-16AM-V2 Network Modules Example of the modem country smart_acf Command The following example shows the usage of the modem country smart_acf command: Router# config terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)# modem country smart_acf usa Router(config)# end Additional References The following sections provide references related to Cisco NM-8AM-V2 and NM-16AM-V2 network modules. Related Documents Related Topic Document Title AT Commands AT Command Set and Register Summary for V.90 WIC-1AM and WIC-2AM Analog Modem WAN Interface Cards NM-8AM or NM-16AM Analog Modem Module Configuration Configuring Dialin with the NM-8AM or NM-16AM Analog Modem Module Data Sheet on Network Modules Integrated V.92 Analog Modem Network Modules for Cisco 2600 Series, 3660, and 3700 Series Routers Standards Standards Title No new or modified standards are supported by this feature, and support for existing standards has not been modified by this feature. 8 Cisco IOS Release 12.3(7)T Cisco NM-8AM-V2 and NM-16AM-V2 Analog Modem Network Modules with V.92 MIBs Command Reference MIBs MIBs Link No new or modified MIBs are supported by this To locate and download MIBs for selected platforms, Cisco IOS feature, and support for existing MIBs has not been releases, and feature sets, use Cisco MIB Locator found at the modified by this feature. following URL: RFCs RFCs Title No new or modified RFCs are supported by this feature, and support for existing RFCs has not been modified by this feature. Technical Assistance Description Link Technical Assistance Center (TAC) home page, containing 30,000 pages of searchable technical content, including links to products, technologies, solutions, technical tips, and tools. Registered Cisco.com users can log in from this page to access even more content. Comm...
Este manual também é adequado para os modelos :Equipamento de rede - NM-8AM-V2 (209.71 kb)