Assessments - 4, GPA: 4.5
(
)
)
|
Facilidade de uso
ADTRAN reserves the right to change the contents without prior notice. In no event will ADTRAN be liable for any special, incidental, or consequential damages or for commercial losses even if ADTRAN has been advised thereof as a result of issue of this publication. About this Manual This manual provides a complete description of the TRACER 64x0 systems (TRACER 6410 and 6420) and system software. The purpose of this manual is to provide the technician, system administrator, and manager with general and specific information related to the planning, installation, operation, and maintenance of the TRACER 64x0 systems. This manual is arranged so that needed information can be quickly and easily found. Aduoti 901 Explorer Boulevard P.O. Box 140000 Huntsville, AL 35814-4000 Phone: (256) 963-8000 Copyright © 2005 ADTRAN, Inc. All Rights Reserved. Printed in U.S.A. 2 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F TRACER 6000 Series Integrated System Manual Revision History Revision History Document Revision Date Description of Changes A December 2004 Initial release of manual to include the TRACER 6420 (5.8 GHz integrated system) and the Quad T1 and Ethernet Switch modules. B March 2005 Include E1 and E1 breakout panel information and add new RF link management bridge functionality. Update the Troubleshooting Guide to include E1 information. C June 2005 Added new real-time power reporting and support for new Quad E1 (120Q) module. D September 2005 Include information for new product offering (TRACER 6410 2.4 GHz (High Power) system). Update the User Iinterface Guide and MIB sections to include new fan and temperature alarm information. Made minor corrections to calculations in the Microwave Path Engineering section. E November 2005 Include information for new product offering (TRACER 6420 5.8 GHz (High Power) system). F November 2005 Added new performance monitoring statistics display information. Notes provide additional useful information. Cautions signify information that could prevent service interruption or damage to equipment. » Warnings provide information that could prevent endangerment to human life. 612806420L1-1F Copyright © 2005 ADTRAN, Inc. 3 Safety Instructions TRACER 6000 Series Integrated System Manual Safety Instructions When using your telephone equipment, please follow these basic safety precautions to reduce the risk of fire, electrical shock, or personal injury: 1. Do not use this product near water, such as a bathtub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. 2. Avoid using a telephone (other than a cordless-type) during an electrical storm. There is a remote risk of shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord, power supply, and/or batteries indicated in the manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for special disposal instructions. Save These Important Safety Instructions 4 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F TRACER 6000 Series Integrated System Manual FCC-Required Information FCC-Required Information Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio frequencies. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. < NOTE Shielded cables must be used with this unit to ensure compliance with Class A FCC limits. VI Changes or modifications to this unit not expressly approved by the party MR,** responsible for compliance could void the user’s authority to operate the equipment. Radio Frequency Interface Statement This equipment has been tested and found to comply with the limits for an intentional radiator, pursuant to Part 15, Subpart C of the FCC Rules. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause interference to radio communications. The limits are designed to provide reasonable protection against such interference in a residential situation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures...