Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
c o m • + 1 -9 5 2 -9 3 8 -8 0 8 0 • 1 -8 0 0 -3 6 6 -3 8 9 1 WorldDSL™ G.S Double Pair/Line Power G.SHDSL for CO and Customer Premises ADC’s WorldDSL G.S is a family of high-speed G.shdsl access devices complying with the ITU-T G.991.2 G.shdsl standard. These modems are specifically designed for the diverse telecommunication needs of global markets. Ideal for telco and enterprise networks, WorldDSL G.S products conform to international standards to ensure compatibility, performance and safety within your network environment. The new G.shdsl modems are part of the broad family of WorldDSL HDSL modems and share common chassis’, enclosures, management software and accessories. They are fully G.shdsl compliant including 36/72 timeslot operation and all required performance monitoring statistics. Both G.821 and G.826 statistics are provided for E1 ports giving users maximum flexibility. Each WorldDSL G.S modem is software-selectable as a communication master or communication slave, so any two units can be used for a point-to-point circuit. The modems are part of a fully managed system, interfacing with a VT100 compatible terminal or a PC. The units can be managed via their local craft port or a central management card installed in a CO shelf. ADC’s Stargazer, Windows or UNIX-based SNMP management software can be used to provision the system, collect alarm and performance data, and conduct diagnostic tests locally or from a remote management station. In any of these modes, the remote unit can be programmed and managed through the CO, minimizing travel to the outdoor site. Features: • Fiber optic quality (BER 10-10) • Single pair operation or double pair operation to double the bandwidth or extend the reach Single Pair – 2.304 Mbps Double Pair – 4.608 Mbps • Nx64K rate selectable from 64 kbps to 2.304 Mbps single pair or 64 kbps to 4.608 Mbps double pair • E1 and FEI (Fractional EI) • 10/100 Ethernet bridge • Automatic protection of TS0 and TS16 for fractional E1 use • Software programmable data port—V.35/V.36/RS530/ X.21 • E1/FE1 and dataport or E1/FE1 and Ethernet port simultaneous operation sharing the bandwidth • Intelligent multi-range line power management for 120, 150, and 200 VDC per EN60950 • Complete G.shdsl reach/range coverage including line power • Support wetting current • One pair can be set up as 1+1 protection for the other pair, TSP • Two pairs can also be configured as point to multi-point • Auto loop crossover management • 10/100 IEEE 802.3u, layer 2 MAC bridge, wire- speed, auto negotiation or programmable for 10/100, full/half modes • Centralized software download for easy upgrade • Jitter meets G.823 requirements WorldDSL™ G.S Double Pair/Line Power G.SHDSL for CO and Customer Premises ADC’s WorldDSL G.S is a family of high-speed G.shdsl access devices complying with the ITU-T G.991.2 G.shdsl standard. These modems are specifically designed for the diverse telecommunication needs of global markets. Ideal for telco and enterprise networks, WorldDSL G.S products conform to international standards to ensure compatibility, performance and safety within your network environment. The new G.shdsl modems are part of the broad family of WorldDSL HDSL modems and share common chassis’, enclosures, management software and accessories. They are fully G.shdsl compliant including 36/72 timeslot operation and all required performance monitoring statistics. Both G.821 and G.826 statistics are provided for E1 ports giving users maximum flexibility. Each WorldDSL G.S modem is software-selectable as a communication master or communication slave, so any two units can be used for a point-to-point circuit. The modems are part of a fully managed system, interfacing with a VT100 compatible terminal or a PC. The units can be managed via their local craft port or a central management card installed in a CO shelf. ADC’s Stargazer, Windows or UNIX-based SNMP management software can be used to provision the system, collect alarm and performance data, and conduct diagnostic tests locally or from a remote management station. In any of these modes, the remote unit can be programmed and managed through the CO, minimizing travel to the outdoor site. Features: • Fiber optic quality (BER 10-10) • Single pair operation or double pair operation to double the bandwidth or extend the reach Single Pair – 2.304 Mbps Double Pair – 4.608 Mbps • Nx64K rate selectable from 64 kbps to 2.304 Mbps single pair or 64 kbps to 4.608 Mbps double pair • E1 and FEI (Fractional EI) • 10/100 Ethernet bridge • Automatic protection of TS0 and TS16 for fractional E1 use • Software programmable data port—V.35/V.36/RS530/ X.21 • E1/FE1 and dataport or E1/FE1 and Ethernet port simultaneous operation sharing the bandwidth • Intelligent multi-range line power management for 120, 150, and 200 VDC per EN60950 • Complete G.shdsl reach/range coverage including line power • Support wetting current • One pair can be set up as 1+1 protection for the other pair, T...