Parameter 1 Parameter Description Shot No.: Shot No.: <1~8> Specify an existing mirror snapshot to cancel schedule. 3.3.6 Miscellaneous Commands 3.3.6.1 Command Name Command Description DiskLagProof Use this command to enable or disable Disk Lag Proof mode. This mode is only effective on RAID Level 5. Parameter 1 Parameter Description Enable / Disable Disk Lag Proof mode. 3.3.6.2 Command Name Command Description NCQMode Use this command to enable or disable NCQ(native command queue) mode. Parameter 1 Parameter Description Enable / Disable NCQ mode. 3.3.6.3 Command Name Command Description SMARTMode Use this command to enable or disable SMART pre-failure warning mode. Parameter 1 Parameter Description Enable / Disable SMART pre-failure warning mode. ACCUSYS, INC. 5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C. TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE REV. G–05-NOV-2007 PAGE 24 OF 27 3.3.6.4 Command Name Command Description SMARTPollingPeriod Use this command to set the polling frequency of SMART pre-failure warning mode. Parameter 1 Parameter Description Polling Time: Polling Time: <1Min:15Min:30Min: Set Polling Time as the SMART polling period. 60Min:2Hr:4Hr:8Hr> 3.3.6.5 Command Name Command Description BeeperMode Use this command to enable or disable the controller beeper. Parameter 1 Parameter Description Enable/Disable controller beeper. 3.3.6.6 Command Name Command Description EQMode Use this command to enable or disable Equalization Mode. Parameter 1 Parameter Description Enable / Disable Equalization Mode. 3.3.6.7 Command Name Command Description CtrlCache Use this command to enable or disable controller cache. Parameter 1 Parameter Description Enable/Disable controller cache. 3.3.6.8 Command Name Command Description SyncCacheMode Use this command to enable or disable Synchronize Cache mode. Parameter 1 Parameter Description Enable/Disable Synchronize Cache mode. ACCUSYS, INC. 5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C. TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE REV. G–05-NOV-2007 PAGE 25 OF 27 3.3.6.9 Command Name Command Description PrefetchNumber Use this command to assign the maximum pre-fetch number. Parameter 1 Parameter Description Pre-fetch Number: Pre-fetch Number: <1:2:4:8:16:32:64:128> The basic unit of maximum pre-fetch number is one stripe. For example, if the maximum pre-fetch number is 8 and the stripe size is 128KB, then the maximum pre-fetch size is 8x128KB. 3.3.6.10 Command Name Command Description DriveCacheMode Use this command to enable or disable drive cache(s). Parameter 1 Parameter Description Drive No.: > Drive No.: Specify a drive or all drives to enable or disable cache. <1~n>, where n stands for maximum existing drive number. Drive=All, the command will have effect on all existing drives. Switch setting: Enable or disable the cache(s) on the specified drive(s). Parameter 2 Switch setting: > 3.3.6.11 Command Name Command Description CtrlTime Use this command to set controller time. Parameter 1 Parameter Description Year: > Year: Year=xx means year 20xx. Parameter 2 Month: > Parameter 3 Day: > Parameter 5 Hour: > Parameter 6 Minute: > Parameter 7 Second: > ACCUSYS, INC. 5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C. TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE REV. G–05-NOV-2007 PAGE 26 OF 27 3.3.7 Firmware Update Commands 3.3.7.1 Command Name Command Description UpdateSystemCode Update system code for the active controller. The controller needs to be restarted for the new system code to take effect. Parameter 1 Parameter Description File Path: File Path: <[DIR] > Specify an existing System Code image file(FileName) located in the specified directory. 3.3.7.2 Command Name Command Description UpdateBootCode Update boot code for the active controller. The controller needs to be restarted for the new boot code to take effect. Parameter 1 Parameter Description File Path: <[DIR] > File Path: Specify an existing Boot Code image file(FileName) located in the specified directory. 3.3.7.3 Command Name Command Description UpdateBIOSEFI Update BIOS and EFI firmware for the active controller. The controller needs to be restarted for the new BIOS/EFI to take effect. Parameter 1 Parameter Description File Path: File Path: <[DIR] > Specify an existing BIOS/EFI image file(FileName) located in the specified directory. ACCUSYS, INC. 5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C. TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE REV. G–05-NOV-2007 PAGE 27 OF 27 Appendix I. Array Mi...
)
