Log:
Assessments - , GPA: ( )

Instruções de Operação ATTO Technology, Modelo FC-82EN

Fabricante : ATTO Technology
Arquivo Tamanho: 2.63 mb
Arquivo Nome :

Língua de Ensino: en

O documento está colocado, por favor, espere
O documento está colocado, por favor, espere

Facilidade de uso


Celerity FC Host Adapters Installation and Operation Manual Selection guide: Celerity 4-Gb adapters Product Features FC-44ES FC-42ES FC-41ES/ FC-42XS FC-41XS Fibre Channel Ports 4 2 1 2 1 FC protocol 4-Gb 4-Gb 4-Gb 4-Gb 4-Gb Maximum Transfer Rate (half duplex) 1.6 GB/sec 800 MB/sec 400 MB/sec. 800 MB/sec 400 MB/sec Maximum Transfer Rate (full duplex) 2 GB/sec 1 GB/sec 800 MB/sec. 1 GB/sec1 800 MB/sec Bus type PCIe PCIe PCIe PCI-X PCI-X Bus characteristics 8 lane 4 lane 4 lane 64-bit 1ЭЭ MHz2 64-bit 1ЭЭ MHz2 Optical interface SFP LC SFP LC SFP LC SFP LC SFP LC Maximum cable length 300m@2-Gb 150m@4-Gb 300m@2-Gb 150m@4-Gb 300m@2-Gb 150m@4-Gb 300m@2-Gb 150m@4-Gb 300m@2-Gb 150m@4-Gb Low profile form factor ✓ ✓ ✓ ✓ Advanced Data Streaming (ADS™) Technology ✓ ✓ V V ✓ Software RAID support ✓ ✓ V V ✓ Developer's kit (Target Mode & API) ✓ ✓ s s V Windows support ✓ ✓ V V V Linux driver support ✓ ✓ V V V Macintosh OS X driver support ✓ ✓ V V V VMware ESX Server 3.5 ✓ ✓ V Novell Netware ✓ ✓ s s ✓ Solaris ✓ ✓ s s ✓ Free BSD ✓ ✓ s s ✓ 1 Performance ceiling is Performance constrained by bus transfer speed. Backward compatible to 32-bit and 33 MHz PCI 2 ATTO Express Power Center recommended 11 2 Install Drivers Before installing your Celerity adapter, you must configure your system to recognize and use it by installing drivers for your operating system. Configure your system to recognize and use your Celerity adapter by installing drivers for your operating system. If you already have one or more Celerity adapters installed and you are installing additional adapter(s), you do not need to perform any of these procedures unless you are updating a previously installed driver. ATTO Celerity adapters ship with the latest firmware installed. The Celerity FC Installation CD shipped with your adapter also contains the latest driver. The Installation CD automatically starts when inserted in the system CD-ROM drive. Navigate the easy-to-use HTML-based menu to find the driver for your adapter and operating system. The Celerity FC Installation CD referred to in these instructions can be the Installation CD shipped with your adapter, a folder containing the latest downloaded and expanded driver, a Celerity FC installation floppy disk, or a USB flash drive. Windows Windows 7, Vista and 2008 may utilize a new User Account Control Feature. Because of this there may be additional confirmations that will need to be performed to properly install the driver. These confirmations normally consist of a dialog where the user has to give Windows permission to perform an action. If you do not have the correct priviliges during this, you will be prompted for an actual user name and password. You may need to contact your system administrator if you do not have this information. Driver Installation 1 Power on your system and log in as the administrator or a user with proper administrative priveleges. 2 Insert the Installation CD. The ATTO Installation CD guide should appear. If not, navigate to the root of the CD and run the AUTORUN.BAT batch file. 3 Click on Windows Drivers. 4 Click on Windows XX Driver link based on the HBA speed (4Gb or 8Gb) and operating system (x86, x64 or Itanium) in use. If you are unsure which version you are using, please contact your system administrator. 5 Click Install Windows Driver XX next to the appropriate item to initiate the driver setup program. 6 Follow the on-screen instructions to complete the driver installation. v y Note WHQL Certified Drivers are available for select Celerity Fibre Channel HBAs. If available, these drivers will be listed below the default Windows drivers. 12 ATTO Technology Inc. Celerity FC Host Adapters Installation and Operation Manual Creating Windows installation media : : ,/ Note Installation media is required when performing an installation of Windows to a hard drive that is controlled by a Celerity FC host adapter. A floppy is required for Windows 2000, XP or 2003. Windows 7, Vista and 2008 can utilize other media such as removable USB stick. This procedure does not apply to Itanium systems as the Celerity FC driver does not support boot functionality on these systems. 1 Power on your system and log in as the administrator or a user with proper administrative priveleges OS X 7 : ';■!* Note The ATTO Celerity FC host adapters support OS X Snow Leopard, Leopard and Tiger operating systems. ATTO 8Gb FC adapters also have EFI boot support on Intel based systems. Driver Installation (for all ATTO FC host adapters) 1 Power on your system and log in as the administrator or a user with proper administrative privileges. 2 Insert the Installation CD. 3 After the CD mounts, open the Celerity volume on the desktop. 4 Open the Drivers folder. 5 Open the folder corresponding to the speed of the HBA. 6 Open the folder corresponding to the OS X version in use. 7 Launch the installer package. 8 Follow the on-screen instructions. Installin...

Este manual também é adequado para os modelos :
Equipamento de rede - FC-81EN (2.63 mb)
Equipamento de rede - FC-84EN (2.63 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias