Assessments - 2, GPA: 4
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
1 Click [Rate] at the bottom of the window. The [Change Rate] window appears. 2 Click a rate, and then click [OK]. Manual Rate Note When you switch between [Auto] and [Manual], change the rate from [1] or [6] to another rate, or change from another rate to [1] or [6] while connected, the NetAV connection may be disconnected and then reconnected automatically in some cases. Watching Video on LocationFree Player 27 Making Video Settings This section explains how to set up the remote control and colour system settings. For the latest version of the on-screen remote control data, see the LocationFree Support web site at LocationFree/support/. Configuring the Remote Control for Video 1 and Video 2 1 Click anywhere in the window to display the index, then select [Settings] at the bottom right of the window. 2 Select [Video Settings], [Remote Settings], and then [Video 1] or [Video 2]. 1 Select the make of the connected device. 2 Select the type of the connected device. 3 If the configuration above is correct, each time you click [Power], you can turn on or off your device. After clicking [Power], it takes 5 seconds or more for the device to respond. If it does not work, make sure that the make and type are correct, and then try again. Notes • Even if the power turns on and off correctly with [Power], other buttons may not be enabled. If this happens, select [Video 1] or [Video 2] from the Index. With the on-screen remote control, confirm that the buttons are enabled. • Try all items of the type in [Type] box to select the most suitable on-screen remote control for the connected devices. • If you want to configure the remote control while disconnecting from the Base Station, click [Connect], [Properties], and then [Video Settings]. • The button names or button numbers of the on- screen remote control may differ from those of the remote supplied with your device. • Some devices may not have a [Power] button. In this case, also use the on-screen remote control to display [Video 1] or [Video 2] and confirm that the buttons are enabled. Connecting two devices to a single input terminal If you have connected a second device via a first device, continue by selecting the [Make] and [Type] of the second device from the list in the lower part of the window, and then check whether it can be turned on and off. To switch the on-screen remote control display, click at the top right of the on- screen remote control. When connecting an all-in-one video device, such as a VCR+DVD player The second remote is automatically set when you select a device displayed as an all-in-one device from the [Type] list (e.g., Sony “VCR+DVD player”). Select the [Switch] button on the on-screen remote control to switch between the remote control of the VCR and that of the DVD player. 3 Click [OK] or [Apply]. Click [OK] to enable the settings and close the [Settings] window. Click [Apply] to enable the settings without closing the [Settings] window. z Tip After configuring the remote control for Video 1 and Video 2, the [Video 1] and [Video 2] options in the [Index] window change to their set remote control names. Watching Video on LocationFree Player 28 Configuring the Colour System for Video 1 and Video 2 If you want to watch SECAM/PAL60/NTSC video, you need to configure the colour system settings. The default setting is “PAL”. 1 Click anywhere in the window to display the index, then select [Settings] at the bottom right of the window. 2 Select [Video Settings] and then [Colour System Settings]. 3 Select a colour system, and then click [OK]. Select the colour system. After you change the colour system settings and close the [Video Settings] screen, the NetAV connection will be disconnected and then it will be reconnected automatically. Watching Video on LocationFree Player 29 3 Click [Connect], [properties], and then Registering LocationFree Devices on the Base Station via the Internet [Add]. Input the following items that you noted in Step 1: • Base Station Nickname (optional) • Domain Name / Static IP Address •Port Number You can register LocationFree devices on the Base Station via the Internet. Note You need to configure the Base Station to accept registration (1 page 42) before registering the device on the Base Station. 1 The following items are needed to register the devices on the Base Station via the 4 Click [Connect]. Internet. Note them down before A message appears asking you to enter the registration. Registration Password that you noted in Step 1. • Domain Name (1 page 40 1) or Static IP Address •Port Number (1 page 39 1) • Registration Password (1 page 42 3) 5 Enter the Registration Password that you noted, and then click [Start]. 2 Double-click the (LocationFree Player) icon on the desktop of the computer. You can also use the [Start] menu. Point to [All programs] ([Programs] in Windows 2000), [Sony LocationFree Player], and then click [LocationFree Player]. Watching Video on LocationFree Player 30 Mo...