Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
This means that you can enjoy the freedom of watching Pay- TV on your bedroom TV. You can also enjoy a film playing on your living-room video recorder while others independently watch their favourite programmes on the main TV. Besides distributing video signals wirelessly , the Wireless TV Link also functions as a switch box for your main TV. It is equipped with four SCART input connectors. These allow you to connect up to four video devices at the same time, so cable swapping or re-configuring your audio/video set-up is no longer necessary. In addition, three of the SCART inputs can be linked to the fourth one, which makes copying your video content very simple. The universal remote control allows you to control the Wireless TV Link, your second TV and up to four video sources, regardless of brand. You don’t have to carry around the other remote control units! The Wireless TV Link is based on wireless RF technology that offers you in-home convenience. To enable you to enjoy the best possible performance, four transmission channels are provided so you can select the channel that provides optimum viewing with the minimum of interference. Pure PurePurePurePurePure wireless wirelesswirelesswirelesswirelesswireless home homehomehomehomehome con conconconconconv vvvvvenience! enience!enience!enience!enience!enience! Safety precautions Please read this guide carefully and keep it for future reference. • Do not use this product in moist places or close to water. • Do not expose this product to extreme heat. • Do not open this product; in case of technical difficulties bring it to your Philips retailer. • Do not cover this product. • Only connect the AC power adapters to a power supply of 220-240 VAC / 50Hz. • Only use the AC power adapters included or a type that complies with safety standard EN60950 and that has the following specification: 12 Volt DC / 500mA. • Inadequately protected or sensitive electronic equipment may be affected by the use of this product. This interference can lead to damage to either equipment. Please check whether or not surrounding equipment can be affected by this product before you start using it. ENGLISH Keys and functions Product illustrationA on inside flap: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Transmitter Unit Power button switches the transmitter between stand-by and on. Power light red in stand-by mode, green when power is on, flashes when receiving remote control commands COPY SOURCE button links SCART input 1,2,3 or SCART OUT to SCART in/output 4. Copy source indication lights indicate which SCART input (1,2 or 3) is linked to SCART in/output 4. When there is no light indication the SCART OUT is linked to SCART in/output 4. VIEW SOURCE button selects which SCART input (1-4) is viewed on the transmitter SCART output View source indication display indicates the SCART input number that is viewed on the transmitter output. AUTO light indicates if automatic SCART switching is enabled (on) or disabled (off). Infra-red remote control blaster lights transmit infra-red remote control signals from the receiver to the video source devices below. Transmission channel switch switches the frequency channel of the audio/video signal to minimize interference. SCART input (1-4) connectors connect SCART-enabled video source devices to these connectors SCART output connector connect to the main TV RCA sound output connector connect to an audio amplifier DC power input Remote control blaster cord connector Remote control blaster cord four infra-red lights used instead of the infra-red remote control blaster lights (A-8) for a more precise control of the video sources. SCART cable Power adapter Remote control antenna ENGLISH Keys and functions Product illustration B on inside flap: 19 20 21 22 23 24 25 26 27 28 Receiver Unit Power button switches the receiver between stand-by and on. When the receiver unit is turned on or off the transmitter unit is automatically turned on or off as well. Power light red in stand-by mode, green when power is on, flashes when receiving remote control commands Remote control signal receiver receives remote control commands which are sent to the transmitter unit to control the video sources. Input source up (+) / down (-) buttons selects one of the four video sources connected to the transmitter unit for viewing on the second TV. Transmission channel switch switches the frequency channel of the audio/video signal to minimize interference. SCART output connector connect to the second TV DC power input SCART cable Power adapter Remote control antenna Important information • Each video source, the main TV and the second TV must have SCART connectors. • Two SCART cables are supplied; you will require additional SCART cables for the video sources you connect. • A video source can be any satellite receiver, Pay-TV decoder box (digital or analogue), video recorder (VCR), DVD player, camcorder, game-console etc. • Before using the Universal Remote Control it must be s...
Este manual também é adequado para os modelos :Equipamento de rede - SBCVL1400/00 (553.73 kb)
Equipamento de rede - SBCVL1400/86 (553.73 kb)