Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Auto Save Profile On/Off When Auto Profile is On, the New profile and Save profile buttons will be disabled. After you Apply Changes a profile will automatically be created with your network settings The Configuration tab contains two sub-tabs: Common and Security. See below for an explanation of the settings of these sub-tabs. • Configuration – sub-tab Common Network Name – Input a wireless network name for the wireless network to which you want to connect. Alternatively, use the Site Survey tab to choose from the list of available Network Names. (Default: philips.) Operating Mode – Set the operation mode to Ad Hoc (Peer-to-Peer) for network configurations that do not have a Wireless Base Station, and to Infrastructure for configurations with a wireless base station. (Infrastructure is the default setting.) Transmit Rate – Auto will automatically negotiate the highest possible wireless network speed. Or set a lower speed manually. Lower speeds will give better range. Channel – If you are setting up an Ad Hoc wireless network, set the channel number to the same radio channel as that used by the other wireless devices in your group. However, if you are connecting to a network via a base station, then the channel is automatically set to the channel of the base station to which the adapter connects. The Channel can only be set when the Operating Mode is set to Ad Hoc (Peer-to-Peer). Power Save – Click the box if you want to use power management to reduce your portable computer's consumption of battery power and still keep the computer available for immediate use. IMPORTANT: All computers and wireless network devices in the same network should have the same Network Name (SSID) and the same encryption key for wireless security. In Ad Hoc mode, you must also specify the same radio channel for all wireless devices. EN • Configuration – sub-tab Security First, click the Security ON/OFF button to enable or disable wireless security. Authentication Type – Choose WEP or WPA-PSK depending on the type of wireless security in the rest of your wireless network. Wired Equivalent Privacy (WEP) and WiFi Protected Access (WPA) are implemented in the adapter to prevent unauthorized access to your wireless network. Key Type – For more secure data transmissions, set encryption to the highest number of bits. E.g. a 128-bit setting gives you a higher level of security than 64-bit. IMPORTANT: The setting must be the same for all clients in your wireless network. Use Passphrase – If Passphrase is selected, security keys for WEP encryption are generated from your passphrase string. If encryption is set to 128 bit, only Key 1 is generated. If encryption is set to 64 bit, Keys 1-4 are generated.You must use the same Passphrase and Default Key settings on all the other stations in your network. Note: A passphrase string can consist of up to 32 alphanumeric characters. The WPA (WiFi Protected Access) implemented in this Wireless USB Adapter11g True Turbo 108 Mbps uses an alphanumeric password between 8 and 63 characters long. This password may include symbols and spaces. IMPORTANT: You must use the same encryption key throughout your network. Apply changes – Click on “Apply changes” to activate the changes you made. Key 1-4 – If the Key Type is set to Hex, the security keys are four 10 digit keys for the 64-bit WEP setting and four 26-digit keys for the 128-bit WEP setting. (The hexadecimal digits can be 0~9 & A~F, e.g. D7 0A 9C 7F E5.) Default Key – Choose the Key ID that has the encryption string you prefer. If you are using a key generated from the passphrase, you must use the same passphrase and key on each wireless device. • Link information The Link information tab displays information on the wireless network name (SSID) to which there is a wireless connection: the signal strength, Troughput history, current connection speed, channel and Base station Name ID (MAC). • IP information The IP information tab displays information on the Host Name, IP Address, IP Netmask, and Gateway. This window also contains buttons for releasing and renewing the IP address. This is done to bring a computer back onto the network after moving it to a different location, or after experiencing an unexpected outage. First release, then renew the IP address. Computers on DHCP networks often (but not always) re-establish network connectivity automatically. EN • Site Survey Selecting the Site Survey tab displays a list of available wireless network access points. Next, click Scan to update the list. It shows you the following information: • Network type shows the network setup • The name of the wireless connection (Network Name, or SSID) • Network mode shows which WIFI standard is used • An icon reflecting if encryption is enabled • Signal strength • Channel that is used by the network • MAC address of the device Double-click one of the network names to open the Profile Wizard for establishing a wireless connection with that network. • Version information Sel...