Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft Internet Explorer. 2. In the address field of your browser, enter You are prompted to enter a user name and password. If you do not see the log in prompt, make sure to include when you type in your browser. 3. Type admin for the user name. The default password is password. NETGEAR recommends that you set a more secure password after you log in (see Set the Password on page 23). • If your extender has an Internet connection, the Firmware Upgrade screen displays (see Upgrade the Firmware on page 24), and the software automatically checks for new firmware at the NETGEAR website. • The Status screen displays with the menu on the left. This screen shows what the current settings are for the extender. If you have trouble connecting: • If you start your computer, connect the Ethernet cable to the extender, and launch your browser quickly, the computer might still need a couple of minutes to recognize the Ethernet LAN connection before you can connect. • Make sure that your Ethernet cable is securely connected to the extender and the computer, and that the extender LAN LED is on. If the LED is not lit, reconnect the Ethernet cable, and relaunch your Internet browser. Use NETGEAR Genie to Set Up the Extender The Smart Wizard can help you set up your extender to connect to a wireless network. For information about more configuration options, see Chapter 2, Extender Network Settings. The Universal Dual Band WiFi Range Extender WN2500RP Installation Guide (included in the package) explains how to install your extender. During installation, when you launch your Internet browser, the Smart Wizard automatically displays. 1. Log in to the extender. Note: Once you begin using NETGEAR Genie, you have to complete all of its steps before you can exit. 2. From the menu, select Setup Wizard. The following screen displays: This is the same Smart Wizard that displays during installation, as described in the installation guide. 3. Either select a network from the list, or select the Manually input my wireless SSID radio button and type the SSID. 4. Enter the passphrase for your wireless network and click Continue. The next screen displays: 5. Make sure that the correct network name is shown, and then click Continue. The following screen displays: After about 2 minutes, the extender displays the following screen: 6. Review the settings, and make sure they are correct. Then, join the extender network with your wireless computer or device. 7. Select the check box after you successfully connect. 8. Click Continue. 2. Extender Network Settings This chapter covers the following topics: • Connect the Extender to an Existing Network • Use WPS to Join the Extender’s Wireless Network • Extender Wireless Settings • Extender IP Address Setup • Status Screen • Attached Devices • Back Up and Manage Extender Settings • Set the Password • Upgrade the Firmware • Advanced Wireless Settings Connect the Extender to an Existing Network You can wirelessly connect the extender to your home network. 1. Select Setup > Connect to an Existing Network. The extender scans for wireless networks, and displays a list. If your wireless network is not on the list, and it is up and running, see Positioning Your Extender on page 8 for suggestions. 2. Select the radio button for your network, and click Continue. If you selected the manual option, you are prompted to type the network name (SSID) and to enter the password to access it: 3. Enter your network’s passphrase or key, and click Continue. The extender joins your wireless network. Use WPS to Join the Extender’s Wireless Network WPS (Wi-Fi Protected Setup) lets you connect a computer or wireless device to the extender’s network without entering the wireless network passphrase or key. Instead, you use a WPS button or enter a PIN to connect. WPS supports WPA and WPA2 wireless security. Note: You cannot use the Push 'N' Connect WPS button to connect the extender to your wireless network. The WPS button on the extender can be used only to connect a computer to the extender. The Universal Dual Band WiFi Range Extender WN2500RP Installation Guide explains how to use WPS during installation. 1. Select Add WPS Client. The following screen displays: 2. Select a radio button. • Push Button (recommended). Either click the button or press the WPS button on the front of the extender. • PIN Number. Select the radio button, and a PIN displays. The extender tries to find the wireless client (the computer) that is attempting to join the network. If you are using a WPS button, it tries for 2 minutes. If you are using a PIN, it tries for 4 minutes. 3. Go to your wireless computer. Use its WPS software to try to connect to the extender. Extender Wireless Settings You can use the Wireless Settings screen to change the network name (SSID) for the extender’s network and to set up wireless secur...