Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Lease Obtained The date when the lease was obtained. Lease Expires The date when the lease expires. IP Address From the Internet adapter menu at under Setup, select IP Address Setup. The following screen displays: This screen shows whether the Internet adapter is set to get its IP address dynamically from the router (this is the most common setting), or is set with a static IP address. • Get Dynamically From Router. The wireless network router assigns an IP address when the Internet adapter connects to its wireless network. Most networks are set up so that the router automatically does this. • Use Static IP Address. Specify a static IP address. This is not usually necessary. If you set this up, you should be technically experienced or have a technically experienced person help you. -IP Address. The static IP address. -IP Subnet Mask: The subnet mask associated with the IP address. -Gateway IP Address. The LAN IP address. -Primary DNS. The primary Domain Name Server (DNS) address. -Secondary DNS. The secondary Domain Name Server (DNS) address. • Enable internal DHCP server after connecting to Wireless AP. Most users should leave this check box unselected. In rare cases, some routers do not provide IP addresses to equipment connected to the WNCE3001. Select this check box to have the WNCE3001 assign IP addresses to the equipment instead. Manage Your Configuration Settings From the Internet adapter menu at under Maintenance, select Backup Settings. The following screen displays: The Backup and Restore options in the Backup Settings screen let you save and retrieve a file containing your Internet adapter’s configuration settings. Once you have your Internet adapter working correctly, you should back up the information to have it available if something goes wrong. When you back up the settings, they are saved as a file on your computer. You can restore the device’s settings from this file. Back Up Settings 1. Click Back Up. Your browser extracts the configuration file from the Internet adapter. 2. If you do not have your browser set up to save downloaded files automatically, locate where you want to save the file. 3. You can give the file a meaningful name at this time, such as internet_adapter.cfg. Restore Settings 1. On the Backup Settings screen, click Browse. 2. Locate and select the previously saved backup file. 3. Click Restore. A screen displays letting you know that the device has been successfully restored to the previous settings. The Internet adapter restarts. This takes about 1 minute. Do not try to go online, turn off the Internet adapter, shut down the computer, or do anything else to the Internet adapter until it finishes restarting! 4. Close the message window. To restore your settings from a saved configuration file, enter the full path to the file on your computer, or click Browse to browse to the file. When you have located it, click Restore to send the file to the Internet adapter. The Internet adapter then reboots automatically. Erase the Settings Under some circumstances (for example, if you have lost track of the changes that you made to the Internet adapter settings), you might want to erase the configuration. After an erase, the Internet adapter returns to its factory settings (see Factory Settings on page 23). To erase the configuration, click the Erase button in the Backup Settings screen. Do not try to go online, turn off the Internet adapter, shut down the computer, or do anything else to the Internet adapter until it finishes restarting! Upgrade the Firmware Unless you changed the settings in the Firmware Upgrade screen previously, the Internet adapter is set up to check for new firmware automatically at login. If you do not want to use the automatic firmware check, clear the Check for new version upon Login check box. 1. From the Internet adapter menu at under Maintenance, select Firmware Upgrade. The following screen displays: 2. Click Check to see if new firmware is available. If it is, follow the onscreen prompts to download it onto your computer. 3. Use the Browse field to locate and select the new firmware. 4. Click Upload to install the new firmware on your Internet adapter. Once you start the firmware upgrade, do not try to go online, turn off the Internet adapter, shut down the computer, or do anything else to the Internet adapter until it finishes restarting! Advanced Wireless Settings The Internet adapter is already configured with the optimum settings. Do not alter these settings unless directed by NETGEAR support. Incorrect settings might degrade the wireless performance of the Internet adapter. From the Internet adapter menu at under Advanced, select Wireless Settings. The following screen displays : You can view or configure the following settings: • Fragmentation Length (256-2346): This is the maximum packet size used for fragmentation. Packets larger than the size...