Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
• The computer may not be communicating with the print server. To test by printing directly from the print server: 1. Open a browser and go to the IP address for the print server. (For example, type and click Go.) Note: If you do not know the IP address, you use the NETGEAR Print Server Administration program. Click Start, point to Programs and click NETGEAR Print Server>NETGEAR Print Server Administration. The Reference Manual on the USB Mini Print Server Resource CD has full instructions. 2. Click Printer Ports on the left. 3. Click Print Test Page. 4. After the test page prints, click Logout. 5. Click Yes (or OK) if asked about closing the browser window. I could print previously but can no longer print from my computer • If the print server is set up to ‘obtain IP address automatically’, the IP address may have changed. Restart your computer. You may also use the IP Setup program on the administrative computer to assign a fixed IP address to the print server. Click Start, point to Programs and click NETGEAR Print Server>IPSetup. • The print server may be overheated. Unplug the power adapter and then plug it in again. Remove any paper or other material that may be restricting ventilation. Lower the temperature in the surrounding environment. Mini Print Server System Requirements • Windows 98, Me, NT 4.x, 2000, XP • A printer with a USB port • Network software Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. Certificate of the Manufacturer/Importer It is hereby certified that the Model PS121 USB Mini Print Server has been suppressed in accordance with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992.The operation of some equipment (for example, test transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the notes in the operating instructions. Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market and has been granted the right to test the series for compliance with the regulations. VCCI Statement This equipment is in the Class A category (information equipment to be used in a residential area or an adjacent area thereto) and conforms to the standards set by the Voluntary Control Council for Interference by Data Processing Equipment and Electronic Office Machines aimed at preventing radio interference in such residential areas. When used near a radio or TV receiver, it may become the cause of radio interference. Read instructions for correct handling. Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice This device complies with part 15 of the FCC Rules. Ope...