Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Table 6-2. Connection Status Items Item Description IP Address The WAN (Internet) IP Address assigned to the router. Subnet Mask The WAN (Internet) Subnet Mask assigned to the router. Default Gateway The WAN (Internet) default gateway the router communicates with. DNS Server The IP address of the Domain Name Service server that provides translation of network names to IP addresses. 3. Click Show Statistics to display router usage statistics. Figure 6-3 Using Network Monitoring Tools v2.1, July 2007 NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual Table 6-3 describes the router statistics. Table 6-3. Router Statistics Items Item Description System Up Time The elapsed time since the router was last restarted. Port The statistics for the WAN (Internet) and LAN (local) ports. For each port, the screen displays: Status The link status of the port. TxPkts The number of packets transmitted on this port since reset or manual clear. RxPkts The number of packets received on this port since reset or manual clear. Collisions The number of collisions on this port since reset or manual clear. Tx B/s The current transmission (outbound) bandwidth used on the WAN and LAN ports. Rx B/s The current reception (inbound) bandwidth used on the WAN and LAN ports. Up Time The time elapsed since this port acquired the link. Poll Interval The intervals at which the statistics are updated in this window. Set Interval To change the polling frequency, enter a time and click Set Interval. Viewing a List of Attached Devices The Attached Devices table contains a table of all IP devices that the router has discovered on the local network. From the main menu of the browser interface, under the Maintenance heading, select Attached Devices to view the table. Figure 6-4 Using Network Monitoring Tools v2.1, July 2007 NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual For each device, the table shows the IP address, NetBIOS Host Name or Device Name (if available), and the Ethernet MAC address. To force the router to look for attached devices, click Refresh. Note: If the router is rebooted, the table data is lost until the router rediscovers the devices. Managing the Configuration File The configuration settings of the WNR834B are stored within the router in a configuration file. You can back up (save) this file to your computer, restore it, or reset it to the factory default settings. From the main menu of the browser interface, under the Maintenance heading, select Backup Settings. Figure 6-5 The following sections describe the three available options. Backing Up and Restoring the Configuration The Restore and Backup options in the Settings Backup menu let you save and retrieve a file containing your router’s configuration settings. Using Network Monitoring Tools v2.1, July 2007 NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual To save your settings, click Back Up. Your browser will extract the configuration file from the router and prompt you for a location on your computer to store the file. You can give the file a meaningful name at this time, such as comcast.cfg. Tip: Before saving your configuration file, change the administrator password to the default, password. Then change it again after you have saved the configuration file. In the event that you forget the password, you will need to reset the configuration to factory defaults. To restore your settings from a saved configuration file, enter the full path to the file on your computer or click Browse to browse to the file. When you have located it, click Restore to send the file to the router. The router will then reboot automatically. Warning: Do not interrupt the reboot process. Erasing the Configuration Under some circumstances (for example, if you move the router to a different network or if you have forgotten the password) you may want to erase the configuration and restore the factory default settings. After an erase, the router’s username is admin, the password is password, the LAN IP address is 192.168.1.1 (or and the router's DHCP server is enabled. To erase the configuration, click the Erase button in the Settings Backup menu. To restore the factory default configuration settings without knowing the login password or IP address, you must use the Default Reset button on the rear panel of the router (see “Problems with Date and Time” on page 7-8). Using Network Monitoring Tools v2.1, July 2007 NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual Upgrading the Router Software The routing software (also called firmware) of the WNR834B router is stored in FLASH memory, and can be upgraded as new software is released by NETGEAR. Your router can download and install the new software, or you can download upgrade files from the NETGEAR Web site and manually send the upgrade file to the router using your browser. Tip: To ensure that you are always using the latest router firmware, enable the Firmware Upgrade Assistant feature so that ...