Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
•With the extender pass-through socket, you retain the use of a socket in your electrical outlet. Place the Extender and Power It On 1.Place the extender halfway between your router and the location that has poor WiFi coverage. If it is not possible to place the extender at the halfway point, move the extender closer to the location with poor coverage, but still within the wireless range of the router. 2.Turn the On/Off switch On/Off switch on the side of the extender to the On position. 3.Plug the extender into a power outlet and wait 1 minute until the extender starts. The Power LED lights green. Connect the Extender to Your WiFi Network 1.Press the WPS button on the side of the extender. The Secure WiFi LED blinks. 2.Within 2 minutes, press the WPS button on your wireless router. The Router Link LED lights. The Secure WiFi LED lights green. The extender network name changes. See New Extender WiFi Network Name on page 6. 1.On your computer or wireless device, find and join the NETGEAR_EXT WiFi network. The Client Link LED lights. 2.Open a web browser. 3.When prompted, select a language from the list. NETGEAR genie displays . 4.Follow the steps to connect the extender to the WiFi network. When the extender connects, the Router Link LED lights. If the network is secure, the Secure WiFi LED lights green. New Extender WiFi Network Name If the extender does not connect to the WiFi network, move the extender to a different location with a better WiFi signal. For example, you might need to move it closer to the router or gateway. Join the Extender WiFi Network 1.Take your computer or wireless device to the location with poor WiFi coverage. 2.Find the new extender network name (MyNetworkName_EXT). 3.Select this network and enter the same WiFi password that you use for your home network. 4.Within 2 minutes, check the arrow LEDs on the extender. •If no arrow is lit, the location is good. •When the extender connects to a network and a client joins the extender network, an arrow LED blinks for 2 minutes if the WiFi signal strength is weak to or from the extender. Blinking left arrow. The extender is too far away from the router or gateway. Blinking right arrow. The extender is too far away from your computer or wireless device. Note: If you are having trouble getting a good WiFi signal, try to create a better line of sight. For example, move the router up off the floor onto a table or desk, or move furniture that might be blocking the extender. Extender Performance The Router Link LED indicates performance between the router and the extender. If this LED is off, the extender is not connected to a WiFi network. • Green indicates the best performance. • Amber indicates a workable performance. • Red indicates a poor connection or no connection. 1.Launch a web browser. 2.Enter mywifiext.net. 3.Enter admin for the user name and enter password for the password. The simplest way to change the settings is to use the setup wizard. 4.Select Setup Wizard. The wizard helps you through these steps: •Select the WiFi network that you want to extend. •Enter the WiFi password for this network. •Name the extender network. •Connect your wireless computer or device to the extender network. You can connect equipment such as a computer, TV, Blu-ray player, or gaming console to the Ethernet port on the extender. Wireless routerAccess the InternetRange extenderin a home officein the family roomwith a Blu-ray player 1.Insert a paper clip into the Reset hole and hold it until the Power LED blinks amber. 2.Release the button. All LEDs turn off for about 3 seconds. The Power LED lights solid amber for about 30 seconds. The Power LED lights solid green. Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates and web support, visit NETGEAR recommends that you use only the official NETGEAR support resources. You can get the user manual online at or through a link in the product’s user interface. Trademarks NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved. Compliance For the current EU Declaration of Conformity, visit: http://support.netgear.com/app/ans...