Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Follow the easy steps in this guide to properly set up your adapter. Please verify that all the package contents listed Quick Install Guide (Highlight comment 07622 25.07.2012 6:58:01 blank) Wireless AC1200 Dual Band USB Adapter below are available. Package Contents DWA-182 (Highlight comment 07622 25.07.2012 6:58:05 blank) Wireless AC1200 Dual Band USB Adapter USB Cradle CD with drivers and software Quick Install Guide If any of the above items are missing, please contact your reseller. System Requirements • A desktop computer with an available USB 2.0 slot • (Highlight comment 07622 25.07.2012 6:58:10 blank) Windows® 7 or XP (32/64-bit) or XP (32/64-bit with Service Pack 3 or higher) • 300MHz processor and at least 64MB of RAM • (Highlight comment 07622 25.07.2012 6:58:14 blank) wireless acAn , 802.11n, 802.11g or 802.11a access point or wireless router DWA-182 1 Before You Begin Before installing your new D-Link wireless adapter, please verify the following: • Remove any previous installations of wireless adapters. • Disable any built-in wireless adapters. • Verify the settings such as the wireless network name (SSID) and security settings of the network(s) you want to connect to. Note: If you’ve installed a different manufacturer’s adapter or a different model D-Link adapter, make sure the software is uninstalled before installing the new software. Some utilities may cause a conflict with the new software. Windows® 7 and XP users may use the built-in wireless utility. 2 Installation WARNING: Do NOT plug the adapter into your computer before installing the drivers. You will be prompted to plug in your adapter during the setup. Step 1: Insert the DWA-182 Driver CD into the CD-ROM drive. When the autorun screen appears, click Install and follow the on-screen instructions to install the wireless adapter drivers and software. (Rectangle comment 07622 25.07.2012 6:58:40 blank) Note: If the CD Autorun function does not automatically start on your computer, go to Start > Run. In the run box type “D:\autorun.exe” (where D: represents the drive letter of your CD-ROM drive) and click OK. Step 2: Select the language you want the setup wizard to display. Click Next to continue. Step 3: The Welcome screen will appear. Click Next to continue. Step 4: Select the location on your computer that you want to install the software to. Click Browse if you want to change the location or click Next to continue installing in the default location. Step 5: Select the Program Folder you want to place the D-Link icons to or click Next to continue with the default location. Step 6: You will now be asked to plug the DWA-182 adapter into an available USB port. Once you plug it in, click Next to continue. Step 7: The drivers and software will now be installed. This process may take a minute to complete. Step 8: Once the Get Connected! screen appears, select either WPS if you have a WPS-enabled router or access point, or select Manually (refer to the next page) to either enter your wireless network name (SSID) and security information, or select from a list (site survey) of available wireless networks in your area. WPS Setup Step A: Press the WPS button (or launch the WPS process) on your wireless router or access point. Please consult your router or access point’s user manual on how to start the WPS process). Step B: Within 2 minutes, click the Connect Now button to start the WPS process on your DWA-182 adapter. Step C: After 2 minutes your adapter will now be securely connected to your wireless network. Manual Setup Step A: Enter the name of your wireless network (SSID) and click Next. You can instead click the Scan button to bring up a list (site survey) of detected wireless networks in your area. Select your network and click Next. Step B: If the wireless network you are connecting to has security (encryption) enabled, enter the security password and click Next to continue. Note: The password is case-sensitive and must be typed in exactly the same as on your wireless router or access point. Step C: You are now connected to your wireless network. Technical Support Having trouble installing your new product? D-Link’s website contains the latest user documentation and software updates for D-Link products. U.S. and Canadian customers can contact D-Link Technical Support through our website or by phone. United States Canada Telephone: (877) 453-5465 Telephone: (800) 361-5265 Internet: Internet: ©2012 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and/or other countries. Other trademarks or registered trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standards (Highlight comment 07622 25.07.2012 6:58:26 blank) wireless ac, 802.11n, 802.11a, and 802.11n specifications. Actual data throughput will vary. Network co...