Assessments - 1, GPA: 4
(
)
)
|
Facilidade de uso
- 11 - Item Description Current Channel It displays the selected channel that is currently used. (There are 14 channels available, depends on the country.) Enable Radio / Disable Radio Click this button to enable/disable the wireless radio. The Wireless CompactFlash Card will connect/disconnect with the wireless network. Rescan Search for all available networks. Clicking on the button, the device will start to rescan. Current Tx Rate It displays the current transfer rate. Throughput It displays the transferring (Tx) and receiving (Rx) data rate in bytes per second. Link Quality It displays the link quality of the connection between the Wireless CompactFlash Card and the Access Point or Peer-to-Peer type it connects. Signal Strength It displays the signal strength of the connection between the Wireless CompactFlash Card and the Access Point or Peer-to-Peer type it connects. Configuration The Configuration tab allows to set parameters for the Wireless CompactFlash Card. Item Description Profile Name Saves values for all previous setting parameters. The default values contain the parameters configured at installation. Once the demands for switching between different networking environments are required, you can also set the additional profiles to eliminate the configuration time. To save the current parameters, highlight the Profile field, type a new name, and click on the Apply button. Network Name A specific name shared among connected Wireless CompactFlash Card, Access Points and other wireless stations on the wireless network. The name must be identical for all devices and points attempting to connect to the same network. The default name is ANY. To change the Network Name, simply enter a new name in the field. Network Type It displays the type of BSS. Access Point: allows the Adapter to communicate with a wired network which employing an Access Point. Peer-to-Peer: allows PC-to-PC, station-to-station communication without employing an Access Point. Peer-to-Peer Channel To communicate with other Wireless CompactFlash Card, you must specify the same channel. Click the up and down arrow at the right of the Peer-to-Peer Channel to set the desired channel. Transmit Rate It displays the current transmit rate. 1Mb, 2Mb, Auto 1 or 2 Mb, 5.5Mb, 11Mb or Fully Automatic) Default Clicks the button to restore to the default settings. Undo Click Undo to ignore the previous setting. Apply Click Apply to activate the settings. ok Click OK to save your changes. Encryption WEP (Wired Equivalent Privacy) encryption can be used to ensure the security of your wireless network. Item Description Encryption (WEP) WEP is a data privacy mechanism based on a 64-bit/128-bit shared key algorithm. Under the drop-down box, you can choose to have WEP encryption Disabled, 64 bit, or 128 bit. Create Keys with Passphrase A Passphrase can be entered to generate four keys used for WEP. For the easiest configuration, the Passphrase method is recommended. Create Keys Manually These four fields can be used to enter WEP keys manually. The method is required to match the keys of other wireless devices on the existing network. .. Alphanumeric: 5 characters Click Alphanumeric if you are using an alphanumeric phrase. .. Hexadecimal: 10 digits (0-9, A-F) Click Hexadecimal if you are using a hexadecimal number. Key 1: Key 2: Key 3: Key 4: This setting is the configuration key used in accessing the wireless network via WEP encryption. Use WEP Key The default key field can be used for specifying which of the four encryption keys to transmit data on the wireless network. Apply Click Apply to activate the settings. You must use the same value/phrase and WEP key settings for all wireless computers in order for the wireless network to function well. Site Survey The Site Survey tab shows all the available Access Points or Peer-to-Peer types and their features. Item Description Network Name The name must be identical for all devices and points attempting to connect to the same network. BSSID A set of wireless stations is referred to as a Basic Service Set (BSS). Computers in a BSS must be configured with the same BSS ID. Channel It shows the selected channel that is currently used. Network Type It displays the type of BSS. Access Point: allows the Adapter to communicate with a wired network which employing an Access Point. Peer-to-Peer: allows PC-to-PC, station-to-station communication without employing an Access Point. WEP Encryption It displays the status of WEP Encryption. Signal Level It displays the signal strength of the connection between the Wireless CompactFlash Card and the Access Point it connects. Rescan Search for all available networks. Clicking on the button, the device will start to rescan and list all available sites. Connect To connect with a new access point, highlights the desired one in the left list box and clicks on the Connect button. Wait a while and the selected one will be marked as a current used access point. About The About tab s...