Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
rx7620
PHCO_32870 - SAM patch
rx6600
rx4640 2
rx3600
rx2660
rx2620
rx1620
Compatible
OLAR or OL*
Host Channel Adapter (HCA) or Switch
Compatible Server
Patch Requirements
Tested IB Configurations
Operating System 5
Supported
If using IPoIB 1 on HP-UX 11iv2, the
following patches are required:
410533-B21
HP-UX
410398-B21 7
BL860c
HP PCIe 1-port 4X Mezzanine Fabric
11i v3 or
N/A
HP 4X DDR IB Switch Module
BL870c 10
PHKL _31500 - DLPI and transport bits
Adapter
11i v2
for HP c-Class BladeSystem
PHCO_32870 - SAM patch
1 IP Filter is not required for IPoIB functionality, but if IP Filter is present, it should be upgraded to either IP Filter product version A.03.05.09 or A.03.05.06.V2, or any later version.
2 It is recommended that you use a PCI-X 133 MHz slot for optimal performance.
3 Each AB286C Host Channel Adapter card requires 512 MB host memory.
4 From B.11.23.06 onwards, support has merged into one product, AB286A/C, and one software fileset.
5 HP requires all systems in the fabric to use the same firmware image version, HP-UX OS software version, and HP-UX Fabric Clustering System for InfiniBand software bundle version (e.g.,
B.11.23.05).
6 For sx2000 users, if your I/O chassis part number is A9836-2101B (stamped with "A9836-0002C" on the front panel), and you plan to use both IB ports of an AB286C/AB345C adapter, you
must replace your I/O chassis with one stamped "A9836-0002D".
7 For BL860c, one external switch per cluster is also required.
8 PCI-E cards are supported on HP-UX 11i v3 as of September 2007.
9 The rx3600 and rx6600 servers support the same maximum number of host adapters: 8 (though configurations with fewer than 8 cards are recommended). There are two versions of each of
these servers -- PCI-X and PCIe. PCI-X versions of each of these servers will support up to 8 PCI-X adapters. In PCIe servers, however, half the slots support PCIe and half the slots support PCI-X
(which means there are a maximum of 4 PCIe and 4 PCI-X adapters supported in the same PCIe version of the rx3600 and rx6600 servers).
10 For best performance, it is recommended that the IB Mezzanine cards be installed only in the 2 x8 slots in the BL860c server blade, though a maximum of 3 cards are supported.
11The HP BLc 4X QDR IB Switch is only supported on the HP BladeSystem C7000 enclosures (P/N's: AD361A, 507014-B21, 507015-B21, 507016-B21, 507017-B21 and 507019-B21)
12 Mixing QDR and DDR devices (Mezz card, Inter-connect or External Switch) will result in operation of speed equal to the slowest device in the configuration.
Legal Notices
© 2004-2011 Hewlett-Packard Company, L.P. The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty.
HP shall not be liable for technical or editorial errors or omissions contained herein.
HP-UX® , and Superdome® are registered trademarks of the Hewlett-Packard Corporation.
All other trademarks and registered trademarks are the property of the respective corporations.