Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Equipamento de rede - HP-UX 11i v2 I/O Cards (142.89 kb)
Equipamento de rede - HP-UX 11i v2 I/O Cards (315.4 kb)
Facilidade de uso
Refer to the section "Configuration, Image, and Log Files" section of the HP Fabric Clustering
System HP-UX Administrator's Guide.
•
Confirm that the HP Fabric adapter and software is supported on the HP server and IO slot
chosen; see HP Fabric Clustering System Support Matrix, available at http://www.docs.hp.com
in the I/O Cards and Networking Software section.
•
Each AD313A Host Channel Adapter card requires 512 MB host memory in supported
servers.
•
Determine where the switch is to be installed and which servers are to have an HCA installed.
•
To use the Internet Protocol over InfiniBand (IPoIB) protocol, see “Internet Protocol over
InfiniBand (IPoIB)” (page 11).
•
The installed version of IP Filter must be higher than “B9901AA A.03.05.06 HP IPFilter
3.5alpha5”.
•
Check the cluster configuration plan for information on where to install adapters, switches,
and cable guides, and where cables are to be routed.
For more information about the configuration plan, please refer to the Planning the Cluster
section of the HP Fabric Clustering System HP-UX Administrator's Guide.
•
Check your server's documentation to see if additional tools may be required for component
installation.
•
For specific instructions on adapter installation, see system-specific documentation on
"installing networking adapters" for each server that adapters will be installed into.
•
On-Line Addition and Replacement (OL*) of HP Fabric adapters is supported on HP Fabric
Clustering System version B.11.23.02 or newer with a couple of limitations; see “On-Line
Addition and Replacement Operations (OL*)” (page 11)
•
Confirm that there are cables of proper length to make connections in the fabric (adapter to
adapter, adapter to switch, or switch to switch).
•
Confirm that HP Fabric Clustering System software suite software media is available. It is
included on CD or available on the Web through http://www.software.hp.com.
•
Confirm that HP-UX super-user privileges are available; they are necessary to complete the
installation.
•
Confirm that the /usr/bin, /usr/sbin, /sbin, and /opt/rdma/bin directories are in
your PATH by logging in as root and using the echo $PATH command.
•
Confirm that the HP-UX operating system is the correct version, HP-UX 11i v2. Use the
uname -a command to determine the HP-UX version of your system. For more information
about the required operating system versions, see HP PCIe (HPC/DB) and PCI-X 2-port 4X
Fabric Adapter Release Notes.
Information Available on the Host Channel Adapter
If you are collecting information from the
adapter before installation for inventory purposes, there is a GUID number on the card. This
number can also be obtained through the HP-UX Fabric Clustering System utilities, but if recording
information for inventory, include the GUID number as well, as it is unique for each adapter.
The GUID will have a format such as: 00:16:35:FF:FF:BF:09:01 .
8
HP PCIe 2-port 4X Fabric (HPC/DB) Adapter Installation
...