Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
6. Return to the Netgear genie screen and click the Next button.
Join a Wireless Network
Check Your Connection Status
NETGEAR genie displays a list of wireless networks in your area.
You can join a wireless network from the NETGEAR genie, or you can use
When you install your adapter, the NETGEAR genie icon displays in the Windows
Wi-Fi Protected Setup (WPS) if your wireless router supports it.
system tray and on the desktop. You can double-click this icon to open
NETGEAR genie to make changes or connect to a different wireless network.
Join a Network Using NETGEAR genie
The color of the icon indicates the strength of your wireless connection:
1. From the NETGEAR genie screen, click the Join a Network button.
White. 3–5 bars (strong connection)
2. Select your wireless network.
3. Click the Connect button.
Yellow. 1–2 bars (weak connection)
4. If the network is secure, enter its password or network key.
Red. 0 (zero) bars (no connection)
The adapter joins the network, which can take a few minutes. Your
settings are saved in a profile.
If you remove your adapter, NETGEAR genie is not available, so the icon does
Standalone Driver Installation
not display. When you insert the adapter again, the icon returns.
Join a Network Using WPS
1. Insert the resource CD in your computer CD drive.
Support
1. Press and hold the WPS button on the adapter for two seconds.
Note: If your computer does not have a CD drive, download the A6210
Thank you for purchasing this NETGEAR product.
resource CD driver by visiting http://support.netgear.com. Click the
After installing your device, locate the serial number on the label of your
Support For Home Go button and enter A6210 in the search field.
product and use it to register your product at https://my.netgear.com.
If the Resource CD screen does not display, browse the files on the CD
You must register your product before you can use NETGEAR telephone
and double-click Autorun.exe.
support. NETGEAR recommends registering your product through the NETGEAR
website.
The NETGEAR Resource CD screen displays.
WPS button
For product updates and web support, visit http://support.netgear.com.
2. Click the Install Windows Standalone Driver button.
NETGEAR recommends that you use only the official NETGEAR support
The driver installs on your computer.
resources.
3. When prompted, either place the adapter into the desktop dock and
2. Within two minutes, press the WPS button on your wireless router or
You can get the user manual online at http://downloadcenter.netgear.com or
connect the USB cable to a USB port on your computer or use the
gateway.
through a link in the product’s user interface.
adapter without the desktop dock and insert the adapter into a USB
The adapter joins the network, which can take a few minutes. Your
port on your computer.
For the complete EU Declaration of Conformity, visit
settings are saved in a profile.
Note: NETGEAR does not recommend that you use another cable to connect
http://support.netgear.com/app/answers/detail/a_id/11621/.
the adapter to the USB port on your computer. Use the desktop dock with the
For regulatory compliance information, visit
attached cable that is supplied in the package. Using another USB cable might
http://www.netgear.com/about/regulatory/.
affect the performance and correct functioning of the adapter.
See the regulatory compliance document before connecting the power supply.
NETGEAR, Inc.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered
May 2014
350 East Plumeria Drive
trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries.
San Jose, CA 95134, USA
Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.