Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
ENGLISH
Quick Install Guide
What This Product Does
Network
Expand your home or office network with the D-Link® Gigabit Desktop Switch. This Switch lets you
Computer
NAS
Laptop
network up to sixteen devices at speeds up to 2000Mbps (at full duplex) and is compact enough to be
16/24-Port Gigabit Desktop Switch
placed virtually anywhere in your home or office. Add a computer, printer, NAS storage device, or network
camera and expand the functionality of your network. You may also connect the Switch to other switches
and routers to expand your network.
Before You Begin
DGS-1016A
Router
Internet
The setup of the Switch can be performed using the following steps:
12V
1A
16
14
12
10
8
6
4
2
• Visually inspect the DC power jack and make sure that it is fully secured to the power adapter.
• Do not cover the ventilation holes on the sides of the Switch, and make sure there is adequate
ventilation around it.
• Do not place heavy objects on the switch.
• Place the Switch in a cool and dry environment.
Mounting
Thank you for purchasing the 16/24-Port Gigabit Desktop Switch. Follow the easy
D-Link Green Technology
steps in this guide to properly set up your switch. Please verify that all the package
• You may mount the Switch on a wall with the included mounting kit. Two mounting slots are
D-Link Green Technology implements special power-saving features that detect cable length and link
provided on the bottom of the Switch for this purpose.
contents listed below are available.
status and adjust power usage accordingly. Green Technology saves energy in two specific ways:
• Magnet mounting is an optional method to mounting the Switch on a wall, and is not included
1. If there is no link on a port (when there is no connection or the device connected is turned off) the
with the package contents.
port(s) will enter a “sleep mode” which will drastically reduce the amount of power used.
Package Contents
2. D-Link Green Technology detects the length of connected Ethernet cable and adjusts power
Connecting the Switch
usage accordingly without affecting performance. This way, a port connected to a 20m or under
Step 1
cable only uses as much power as it needs, instead of using full power, which is only needed for
Plug the supplied power adapter into the Switch and the other end into a power outlet, power strip,
100m cables.
16/24-Port Gigabit Desktop Switch
or surge protector (recommended). Verify the Power indicator is lit on the Switch.
This product is IEEE 802.3az Energy Efficiency Ethernet compliant. The IEEE 802.3az EEE standard defines
mechanisms and protocols intended to reduce the energy consumption of network links during
Step 2
periods of low utilization, by transitioning interfaces into a low-power state without interrupting the
Connect one end of an Ethernet cable in the device you want to connect to the Switch and the other
network connection. Both connected devices must support 802.3az EEE for power saving support. If the
Wall Mount Kit
end into one of the Ethernet ports on the Switch. Check the Link lights (LEDs) on both the Switch and
connected device does not support 802.3az EEE, the switch will default to D-Link’s Green Technology of
the device to verify that the cable is good and that there is a valid connection.
power saving.
Note: A Category 5 (or higher) Ethernet cable must be used for 100Mbps or higher operation.
Technical Support
Power Adapter
Having trouble installing your new product? D-Link’s website contains the latest user documentation and
LEDs
software updates for D-Link products. U.S. and Canadian customers can contact D-Link Technical Support
through our website or by phone.
Power Indicator - This green indicator light is on when the Switch is receiving power; otherwise, it is off.
United States
Canada
If any of the above items are missing, please contact your reseller.
Link/Act - This LED indicator light is green when the port is successfully connected at 1000Mbps. The
Internet: http://support.dlink.com
Internet: http://support.dlink.ca
green indicator will blink as data is transmitted or received.
This LED indicator light is amber when the port is successfully connected at 100Mbps or 10Mbps. The
Copyright ©2013 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries. Other
amber indicator will blink as data is transmitted or received.
trademarks are the property of their respective owners. Product specifications, size and shape are subject to change without notice, and actual
product appearance may differ from that depicted on the packaging. Visit dlink.com (US) or dlink.ca (Canada) for more details.
DGS-1016A / DGS-1024A
Version 2.0 | October 23, 2013
... Este manual também é adequado para os modelos :
Equipamento de rede - DGS-1024A (192.05 kb)