Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Quick Install Guide
Package Contents
LEDs
N
300
Power LED - The light will turn from red to a
blinking amber during boot up or a factory reset.
Wireless Range Extender (DAP-1320)
The solid green light indicates the DAP-1320 is
connected to the existing network/router.
Wi-Fi Configuration Note
Wireless Range Extender
Quick Install Guide
If any of the above items are missing, please contact your
reseller.
DAP-1320
f Start Here
Suggested Extender Setup
Which Setup Method Should I Use?
WPS Setup (Wi-Fi Protected Setup)
If you have a WPS-enabled router, use the WPS Setup section below to guide you through the setup
procedure. This will automatically connect your existing wireless router or access point to your DAP-1320.
Note: For more information about using WPS on your router or access point, refer to its manual.
Web Browser Setup
If you do not have an existing wireless router with WPS, use the Web Browser Setup section to connect
your DAP-1320 using your computer.
Extender Placement Recommendation
For best results place the DAP-1320 within equal distance between your wireless router/access point
Note: Place your DAP-1320 in between your AP/Router and wireless clients.
and your wireless clients.
WPS Setup (Easy Push Button Setup)
1
2
3
4
5
WPS Button
WPS
Button
DAP-1320
Plug the DAP-1320 into a wall outlet and
Press the WPS button on your AP/
Press and hold the WPS button until the light starts Your AP/Router and DAP-1320 will be connected
To connect wireless clients to the DAP-1320, use the Wi-Fi
verify if the power LED has turned from red
Router.
blinking green and then release. Please allow up to two when the LED light turns solid green.
Network Name (SSID) and Wi-Fi Password information located
to a blinking amber.
minutes for the WPS process to finish.
on your configuration note.
Note: Usually the WPS LED will
Note: If connection fails, try moving your DAP-1320
blink once it is pressed. Check
Once the connection is successful the LED will be solid closer to your wireless router/access point and
your router’s manual for more
green.
repeat steps 2 and 3.
information.
Web Browser Setup
1
2
3
4
5
6
90mm
D-Link DAP-1320 Wi-Fi Configuration Note
Web browser link:
http://dlinkap.local or http://192.168.0.50
Username: “Admin”
Username: Admin
Password:
54mm
Wi-Fi Network Name (SSID) :
Wi-Fi Network Name (SSID) :
dlinka8fa
Wi-Fi Password :
Wi-Fi Password :
akbdj19368
DAP-1320
Plug the DAP-1320 into a wall
From your laptop or mobile device
Open a web browser and type
Select the configuration method and
Enter the Wi-Fi Password for the router
From your laptop or mobile device
outlet and verify if the power LED
go to your Wireless Utility to display
http://dlinkap.local (Windows/
click Next.
you are using to connect and click Next.
go to your wireless utility to display
has turned from red to a blinking
the available wireless networks and
Mac/iPhone/iPad). Please follow
the available wireless networks. Then,
amber.
Once the second screen appears, you
select the Wi-Fi Network Name (SSID)
the on-screen instructions to
For Manual configuration, select the
can choose to change the
search for the Wi-Fi Network Name
that is located on your configuration
complete the setup.
Wi-Fi network you would like the
Wi-Fi Network
(SSID) for the DAP-1320 that you
note (ex: dlink-a8fa). Then, enter the
DAP-1320 to connect to wirelessly.
Name (SSID) and the Wi-Fi Password for
the DAP-1320. Click Next to continue
created in Step 5 and connect to the
Wi-Fi password which is also located
and finish the setup process.
network.
on your configuration note. (ex:
akbdj19368).
©2012 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation
Technical Support
or its subsidiaries in the United States and/or other countries. Other trademarks or registered trademarks are the property of their respective
U.S. and Canadian customers can contact D-Link technical support through our web site or by
United States
owners.
phone. You can find software updates and user documentation on the D-Link website as well as
Telephone: (877) 453-5465
Maximum wireless signal rate derived from IEEE Standard 802.11g and 802.11n specifications. Actual data throughput will vary. Network
frequently asked questions and answers to technical issues.
Internet: http://support.dlink.com
conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower
Before you contact technical support, please have the following ready:
actual data throughput rate. Environmental conditions will adversely affect wireless signal range.
Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted on
• Model number of the product (e.g. DAP-1320)
Canada
the package. Visit dlink.com (US) or dlink.ca (Canada) for more details.
• Hardware Revision (located on the label on the bottom of the product (e.g. rev A1))
Telephone: (800) 361-5265
iPhone, iPad, and iPod touch are registered trademarks of Apple Inc. Android is a trademark of Google Inc.
Internet: http://support.dlink.ca
• Serial Number (s/n number located on the label on the bottom of the product).
Version 1.0 (August 28, 2012)