Log:
Assessments - , GPA: ( )

Instruções de Operação AMX, Modelo Table Charging Station MVP-TCS-52

Fabricante : AMX
Arquivo Tamanho: 131.15 kb
Arquivo Nome : MVP-TCS-52.InstallationGuide.pdf

Língua de Ensino: en

O documento está colocado, por favor, espere
O documento está colocado, por favor, espere

Facilidade de uso


The charging station is available in either white (FG5966-11) or black (FG5966-10). For more information, please refer to the Accessories section of the MVP-5200i Modero Viewpoint Widescreen Touch Panel User Manual, available at MVP-5200i device Table Charging Station FIG. 1 MVP-TCS-52 Table Charging Station (FG5966-10) Specifications Charging Station rear support FIG. 3 MVP-TCS-52 - Front view with MVP-5200i Recharging To recharge the MVP-5200i, slide the device into the Table Charging Station cradle bottom-first and make sure the device is fully seated in the Charging Station. The charger pins in the bottom of the cradle (FIG. 4) must be in contact with the connector on the bottom of the MVP-5200i for it to start recharging. The MVP panel will stop recharging automatically once the battery has achieved its maximum charge. MVP-TCS-52 Specifications Dimensions (HWD): • 8.0” x 4.75” x 3.5” (20.32cm x 12.07cm x 8.89cm) -Charging Station cradle Weight: • .65 lbs (.29 kg) Rear Connector: • 12-pin charging connector on bottom of device cradle. ^ 1 ocking groove ^ /”^1_____ _ _ — :___ Operating/ Storage Environments: • Operating Temperature: 0° C (32° F) to 40° C (104° F) • Operating Humidity: 20% - 85% RH • Storage Temperature: -20° C (-4° F) to 60° C (140° F) • Storage Humidity: 5% - 85% Rh Included Accessories • MVP-TCS-52 Table Charging Station Installation Guide (93-5966-02) • PS3.0 Power Supply (FG423-30) FIG. 4 MVP-TCS-52 - Rear view Other AMX Equipment: • MVP-5200i Modero Viewpoint Widescreen Touch Panel -Gloss Black (FG5966-01) • MVP-5200i Modero Viewpoint Widescreen Touch Panel -Gloss White (FG5966-02) • MVP-WCS-52: Wall Charging Station (FG5966-1X) Cleaning the MVP-TCS-52 You should clean the Table Charging Station after each day's use to maintain the device's appearance. Always use a clean cotton cloth and a spray bottle containing water or a vinegar-based cleaner, as alcohol-based cleaners can Powering the MVP-TCS-52 The MVP-TCS-52 uses a PS3.0 power supply to provide direct power for the MVP panel both for standard function and for charging its internal battery. damage the device. Do not directly spray the device: instead, spray the cloth to prevent moisture from collecting on the charger pins. Do NOT use an abrasive of any type to clean the Table Charging Station, as this may permanently damage or remove the device's finish. Turn the device upside down and connect the terminal end of the PS3.0 power supply to the PWR connector on the bottom of the MVP-TCS-52. To prevent wear on the power supply cord and assure that the device's base is in full contact with the table surface, press the cord into the locking groove running across the bottom of the device (FIG. 2). Front of Charging Station Bottom of Charging Station Power source cable path PWR connector location FIG. 2 Power source cable path for bottom of MVP-TCS-52 3. Provide power to the MVP-TCS by connecting the PS3.0 cord to an external power source. 4. Place the touch panel in the Charging Station cradle (FIG. 3), guiding it into place with the locking grooves on each side of the cradle (FIG. 4). When fully seated, the touch panel's charging station connector should be in contact with the Charging Station's charger pins. 2 For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s). 1/08 ©2008 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specifications without notice at any time. 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • 93-5966-02...

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias