Log:
Assessments - 5, GPA: 4.6 ( )

Instruções de Operação Actiontec electronic, Modelo GT701

Fabricante : Actiontec electronic
Arquivo Tamanho: 2.53 mb
Arquivo Nome : f4c1a481-4430-49a6-bfa7-73b897e30f24.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


The Modem is the simplest way to connect computers to a high-speed broadband connection. This easy-to-use product is perfect for the home office or small business. If you want to take your computing to the next level, the Actiontec USB/Ethernet DSL Modem is sure to be one of the keys to your success. Package Contents s Actiontec USB/Ethernet DSL Modem s Black bag (includes Power cord and gray DSL cable) s Phone filters s Yellow (Ethernet) cable s Blue (USB) cable s Installation CD s Quick start guide 1 Actiontec USB/Ethernet DSL Modem User Manual 2 Minimum System Requirements s Active DSL service s Computer with a 10/100 Mbps Ethernet connection, or USB connection . Note: USB LAN port is not supported with Microsoft Windows 95, Windows NT 4.0, and Mac OS. s Microsoft Windows 98 Second Edition (SE), Windows Millennium Edition (Me), Windows NT 4.0, Windows 2000, Windows XP, Mac OS 7.1 and above s Internet Explorer 4.0 or higher (5.x recommended) or Netscape Navigator 4.0 or higher (4.7 recommended) s TCP/IP network protocol installed on each computer Features s Plug-and-Play installation support for systems with Windows operating systems (98, 98SE, Me, 2000, and XP) s ADSL WAN port (RJ-11) s Compliant with full-rate ANSI T1.413 Issue 2, ITU G.992.1 (G.dmt) and G.992.2 (G.lite) standard s Auto-handshake for different ADSL flavors s USB 1.1 device specification compliance s 11 Mbps USB data rate (full speed) s Bridged Ethernet over ATM, PPP over ATM, PPP over Ethernet s Precise ATM traffic shaping s IP packet routing and transparent bridge s Routing protocol supports RIP-1, RIP-2, static routing s Built-in NAT, DHCP server s DNS relay support s PAP/CHAP authentication, administrative passwords through Telnet s Compliant with IEEE 802.3 Ethernet standard s 10/100 Base-T Ethernet port s Flow control support for Fast Ethernet s Web-based configuration setup s Default configuration backup restore s FTP firmware upgradeable s Web download support Getting to Know the Modem This section contains a quick description of the Modem’s lights, ports, etc. The Modem contains several indicator lights (LEDs) on its front panel and a series of ports on its rear panel. Front Panel The front panel of the Modem features five lights (or LEDs): Power, DSL, Internet, Ethernet, and USB. Power DSL Internet Ethernet USB Power DSL Internet Ethernet USB USB/Ethernet DSL Modem Power Light The Power light displays the Modem’s current status. If the Power light glows steadily green, the Modem is receiving power and fully operational. When the Power light flashes rapidly, the Modem is initializing. If the Power light is not illuminated when the Power cord is plugged in, the Modem has suffered a critical error and technical support should be contacted. DSL Light The DSL light illuminates when the Modem is connected to a DSL line. Internet Light When the Internet light glows steadily, the Modem is connected to the DSL provider. When it flashes, the Modem’s built-in DSL modem is training for DSL service. When it glows red, the Modem failed to connect to the Internet. Ethernet Light The Ethernet light illuminates when the Modem is connected via its Ethernet port. USB Light The USB light illuminates when the Modem is connected via its USB port. Rear Panel The rear panel of the Modem contains four ports (Phone, USB, Ethernet, and Power), as well as an On/Off switch and Reset button. Power Reset Phone USB Ethernet Black Power Cord (from black Power port to Power Outlet) Yellow Ethernet Cable (from yellow Ethernet port to Computer) Blue USB Cable (from blue USB port to Computer) Gray DSL Cable (from gray Phone port to Phone Jack) Phone Port The Phone port is used to connect the Modem to a phone jack. USB Port The USB port is used to connect a computer to the Modem via USB cable. Ethernet Port The Ethernet port is used to connect a computer to the Modem via Ethernet cable. The Ethernet port is a 10/100 Mbps auto-sensing port, and either a straightthrough or crossover Ethernet cable can be used when connecting to the port. On/Off Switch The On/Off switch controls power to the Modem. When the top of the switch is depressed, the Modem is powered off. When the bottom of the switch is depressed, the Modem is powered on (assuming the Power cord is correctly connected). N Warning: Do not power down the Modem using the On/Off switch during the reset process. Doing so may result in permanent damage to the Modem. Reset Button Depressing the Reset button for one or two seconds will power cycle the Modem (similar to unplugging and then plugging in the Modem’s Power cord). To restore the Modem’s factory default settings, depress and hold the Reset button for approximately 15 seconds. The reset process will start about 10 seconds after releasing the switch. Power Port The Power port is used to connect the Power cord to the Modem. N Warning: Do not unplug the Power cord from the Modem’s Power port during the reset process. Doing so may result in permanent damage to ...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias