Log:
Assessments - 6, GPA: 3.8 ( )

Instruções de Operação Advantech, Modelo ADAM-4570

Fabricante : Advantech
Arquivo Tamanho: 1.91 mb
Arquivo Nome : f05e4328-a7f8-42ee-837f-8f951c8e4ac7.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


The time limitation (seconds) is from 1 ~ 4095 46 ADAM-4570/ADAM-4571/EDG-4504 User’s Manual 3.2.5 Security Configuration Figure 3-9 Security configuration Only configure the authorized IP This option is enabled in order to protect all configuration settings from being changed inadvertently. Allow any IP to access If this option is enabled, any PC can access data from this ADAM-4570/ADAM-4571/EDG-4504. The specified IP which can access If you do not want many PCs to have the access right, you can limit at most 32 PCs to access data from this ADAM-4570/ ADAM-4571/EDG-4504. Chapter 3: Installation and Configuration 47 3.3 Status Messages The status message shown at the bottom of the utility window reflects the current status of ADAM-4570/ADAM-4571/EDG4504. Figure 3-10 Status messages “Read” The configuration utility has found the ADAM-4570/ADAM4571/ EDG-4504 and it is ready for use. “Searching EDG COMport” The configuration utility is searching the ADAM-4570/ADAM4571/ EDG-4504 “Querying DATA from EDG COMport” The configuration utility is getting data from the ADAM-4570/ ADAM-4571/EDG-4504. 48 ADAM-4570/ADAM-4571/EDG-4504 User’s Manual “Device Ready” The ADAM-4570/ADAM-4571/EDG-4504 is ready to be configured and is now waiting for acknowledgement from the device. “Lost Connection from the Device” Due to device shut down or network failure, the configuration utility has lost connection after 5 seconds. “Fail to apply this setting to the device” Specific settings are not accepted by ADAM-4570/ADAM4571/ EDG-4504. “The device fails to respond” The connected device does not respond. “Fail to reset the device” Fail to reset the ADAM-4570/ADAM-4571/EDG-4504. 3.3.1 Connection Diagnostic When you complete the configuration of your ADAM-4570/ ADAM-4571/EDG-4504s, you can follow the steps to check if the ADAM-4570/ADAM-4571/EDG-4504 connects to network or not. 1. Execute the Microsoft DOS program. 2. Execute “PING” command and type your IP address of ADAM-4570/ADAM-4571/EDG-4504. If ADAM-4570/ ADAM-4571/EDG-4504 connects to your network, it will display in the screen. If the ADAM-4570/ADAM-4571/ EDG-4504 cannot be pinged, you will need to ask someone Chapter 3: Installation and Configuration 49 at the remote site to check and see if the power is on, and make sure that the connection is okay. 3.4 Port Mapping Utility The purpose of the port mapping utility is to help you manage all ports which are in one Windows NT or Windows 2000 platform. The utility displays three types of ports: Used ports, Unused ports and ADAM-4570/ADAM-4571/EDG-4504 ports. Please follow the steps. 1. Click the UNUSED PORTS item and select the port which you want to configure. Figure 3-11 Unused ports 2. Click ADD button to assign the COMport to the specific ADAM-4570/ADAM-4571/EDG-4504. 3. Type IP address of the ADAM-4570/ADAM-4571/EDG4504 and select ports. 50 ADAM-4570/ADAM-4571/EDG-4504 User’s Manual Figure 3-12 Assign COM port to ADAM-4570/ADAM-4571/EDG-4504 Note: If you assigned different COMport to the same ADAM4570’ s port. The dialog box will appear to remind you. Figure 3-13 Warning window 4. The port has been added into ADAM-4570/ADAM-4571/ EDG-4504 5. If you want to remove the COMport, click DELETE to remove this. Chapter 3: Installation and Configuration 51 6. After you complete the configuration, click ”Apply”. 3.4.1 Self Test Function The purpose of this test is to make sure the communication from host PC to ADAM -4570 is OK. If there is still an error, you can check the communication from the ADAM-4570/ADAM4571/ EDG-4504 to the serial devices. If the test is selected, an external test will be done to check that the connection signals for each port are working properly. For the test, you will need to connect each port to a loopback tester (provided in the package). Refer to the following chart for the specifications of this loopback tester. The loopback test only applies to RS-232 mode. The test is divided into two parts: Signal test and Communication Parameters test. 52 ADAM-4570/ADAM-4571/EDG-4504 User’s Manual 1. Click the Test button in the Port Mapping utility. Figure 3-14 Test window Signal Test • RTS . CTS: Check the RTS and CTS signals between two ports. • DTR . RI: Check the DTR and RI signal between two ports. • DTR . DSR: Check the DTR and DSR signal between two ports. • DTR . DCD: Check the DTR and DCD signal between two ports. Communication Parameters Test • Baud rate: From 50 bps to 230 Kbps • Data bit: 5,6, 7, 8 • Stop bit: 1, 1.5, 2 • Parity: odd, even, none, space, mark Chapter 3: Installation and Configuration 53 2. Click OK button to return to the port mapping window. All the ports in the ADAM-4570/ADAM-4571/EDG-4504 are tested ok. Figure 3-15 Loopback test 3.4.2 Upgrading ADAM-4570/ADAM-4571/EDG4504’ s Firmware Download Advantech continually upgrades its firmware to keep pace with the ever-expanding world of computing. You can use the Download function located on Port Mapping utility to carry out the upgrade procedu...

Este manual também é adequado para os modelos :
Equipamento de rede - ADAM-4571 (1.91 mb)
Equipamento de rede - EDG-4504 (1.91 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias