|
Facilidade de uso
Click “Next” 5. If using a driver that has not been digitally signed by Microsoft, you will be asked if you want to continue the installation. Click Continue. 6. When the new hardware wizard has finish installing the Serial ATA card. Click “Finish” to complete the installations. Confirming Serial ATA Driver Installation 1. Right click the My Computer icon and select properties. 2. Click Device Manager in the Menu Tree. 3. Click the “+” sign in front of SCSI controllers. Silicon Image SATA controller should appear. System Requirements: • Computer with one available PCI slot • Windows DOS/NT/2000/XP/2003 server RAID 0/1 described Stripe (RAID 0): Greatly increases the performance of data transfer by simultaneously writing data to 2 drives. Mirror (RAID 1): duplicates or mirrors the data on both drives. No data will be lost if one of the drives fails. Mirror-Striping (RAID 0+1) Combined both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that come from Mirroring. RAID 1+S (Mirrored-Sparing) Can automatically replace the failed drive and rebuild the system when booting HDD failed. Important Note: • To do a RAID SET, you can press F4 or CTRL+S from the boot up screen. Read and follow the instruction inside the BIOS screen. • You can also install the SATA GUI utility Under Windows to monitor the RAID Set. It is under the Utility section of the driver disc. • Use the controller BIOS setup for creating RAID SET. SUPPORT Main: Addonics Technologies 2466 Kruse Drive San Jose CA 95131 Phone: 408 433-3899 Fax: 408 433-3898 Internet: Technical Support (8:30 am to 5:30 pm PST) Phone: 408 433-3855 Note: Specifications subject to change without notice. Emai|: Techinfo@addonics.com Copyright © 1998 - 2005 Addonics Technologies, Inc. All Rights Reserved....
Este manual também é adequado para os modelos :Equipamento de rede - ADSA4R-E (158.47 kb)
Equipamento de rede - ADSA4R-E (158.47 kb)