Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
Maintaining Tools Keep your tool in good repair by adopting a regular maintenance program. Before use, examine the general condition of your tool. Inspect guards, switches, tool cord set and extension cord for damage. Check for loose screws, misalignment, binding of moving parts, improper mounting, broken parts and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, turn the tool off immediately and have the problem corrected before further use. Do not use a damaged tool. Tag damaged tools “DO NOT USE” until repaired (see “Repairs”). Under normal conditions, relubrication is not necessary until the motor brushes need to be replaced. After six months to one year, depending on use, return your tool to the nearest MILWAUKEE service facility for the following: • Lubrication • Brush inspection and replacement • Mechanical inspection and cleaning (gears, spindles, bearings, housing, etc.) • Electrical inspection (switch, cord, armature, etc.) • Testing to assure proper mechanical and electrical operation WARNING! To reduce the risk of injury, electric shock and damage to the tool, never immerse your tool in liquid or allow a liquid to flow inside the tool. Cleaning Clean dust and debris from vents. Keep the tool handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean your tool since certain cleaning agents and solvents are harmful to plastics and other insulated parts. Some of these include: gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household detergents containing ammonia. Never use flammable or combustible solvents around tools. Repairs If your tool is damaged, return the entire tool to the nearest service center. page 6 ACCESSORIES WARNING! To reduce the risk of injury, always unplug the tool before attaching or removing accessories. Use only specifically recommended accessories. Others may be hazardous. For a complete listing of accessories refer to your MILWAUKEE Electric Tool catalog or go on-line to To obtain a catalog, contact your local distributor or a service center. Die Grinding Points Die grinding points are available in a range of shapes, sizes, and thickness, as shown in the following chart. Shape Cat. No. Diameter Thickness Max. Speed (RPM)* A1 49-95-0010 3/4" 2-1/2" 19800 A3 49-95-0020 1" 2-3/4" 16100 A11 49-95-0030 7/8" 2" 19860 A38 49-95-0043 1" 1" 34500 W205 49-95-0053 3/4" 1" 34500 W218 49-95-0063 1" 1/2" 38200 W220 49-95-0130 1" 1" 25500 W222 49-95-0040 1" 2" 15900 W236 49-95-0093 1-1/2" 1/2" 25470 W242 49-95-0052 2" 1" 19100 B52 49-95-0112 3/8" 3/4" 45370 B97 49-95-0123 1/8" 3/8" 105000 B122 49-95-0133 3/8" 3/8" 61650 B131 49-95-0143 1/2" 1/2" 34500 B135 49-95-0153 1/4" 1/2" 60000 W146 49-95-0163 1/8" 1/2" 105000 W154 49-95-0173 3/16" 1/2" 70500 W163 49-95-0183 1/4" 1/2" 60000 W176 49-95-0193 3/8" 1/2" 45370 W185 49-95-0203 1/2" 1/2" 34500 *with maximum 1/2" overhang 1/8" Collet Cat. No. 48-66-0965 1/4" Collet Cat. No. 48-66-0975 Collet Nut Cat. No. 48-68-0030 1/2" Open End Wrench Cat. No. 49-96-4040 11/16" Open End Wrench Cat. No. 49-96-4090 1" Open End Wrench Cat. No. 49-96-4075 Collet Body Cat. No. 48-68-0040 FIVE YEAR TOOL LIMITED WARRANTY Every MILWAUKEE tool is tested before leaving the factory and is warranted to be free from defects in material and workmanship. MILWAUKEE will repair or replace (at MILWAUKEE’s discretion), without charge, any tool (including battery chargers) which examination proves to be defective in material or workmanship from five (5) years after the date of purchase. Return the tool and a copy of the purchase receipt or other proof of purchase to a MILWAUKEE Factory Service/Sales Support Branch location or MILWAUKEE Authorized Service Station, freight prepaid and insured. This warranty does not cover damage from repairs made or attempted by other than MILWAUKEE authorized personnel, abuse, normal wear and tear, lack of maintenance, or accidents. Battery Packs, Flashlights, and Radios are warranted for one (1) year from the date of purchase. THE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN ARE EXCLUSIVE. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED FOR MERCHANTABLILITY OR FITNESS FOR PARTICULAR USE OR PURPOSE. This warranty gives you specific legal rights. You may also have other rights that vary from state to state and province to province. In those states that do not allow the exclusion of implied warranties or limitation of incidental or consequential damages, the above limitations or exclusions may not apply to you. This warranty applies to the United States, Canada, and Mexico only. page 7 REGLES GENERALES DE SECURITE POUR LES OUTILS ELECTRIQUE AVERTISSEMENT! LIRE SOIGNEUSEMENT TOUTES LES INSTRUCTIONS Le non resp...
Este manual também é adequado para os modelos :Máquinas e acabar - 5194 (129.67 kb)
Máquinas e acabar - 5196 (129.67 kb)