Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
C). • Rotating the backing plate HWARNIN ¡G! Always pull the mains plug is out of the socket before doing any work on the device. □ Rotate the backing plate into the desired position (see Fig. D). Sanding and surfaces: The sanding output and the quality of the surface finish are determined by the grade of grit on the sanding sheet. □ Always use sanding sheets with grades that are suitable for the particular surface you are sanding. 10 GB/IE III PARKSIDE Preparing for use / Maintenance and cleaning / Service centre / Warranty • Advice on use □ Switch the device on before placing it against the workpiece. □ Apply light sanding pressure only. □ Advance the device at an even rate. □ Change sanding sheets at the appropriate time. □ Do not work on different types of material using the same sanding sheet (e.g. wood and then metal). To achieve the best sanding results you should use unworn, undamaged sanding sheets. □ Clean the sanding sheet from time to time with a vacuum cleaner. □ Sand difficult to reach places with the front or side corners of the backing plate |~7~1. □ Work in parallel and overlapping widths. □ After sanding the workpiece, lift the device from the workpiece before switching it off. have the replacement carried out by the manufacturer or its service centre. This will ensure that your device remains safe to use. • Warranty The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. In the event of a warranty claim, please make contact by telephone with our Service Department. Only in this way can a post-free despatch for your goods be assured. • Maintenance and cleaning HWARNIN Q3 Always pull the mains plug is out of the socket before doing any work on the device. The delta sander is maintenance-free. □ Clean the device frequently. This should be done immediately after you have finished using it. □ For cleaning the housing use a dry cloth only. □ Remove any adhering sanding dust with a narrow paint brush. □ Never any kind of sharp object or petrol, solvents or cleaning agents that might attack plastic. Do not allow any liquids to enter the inside of the device. □ Always keep the ventilation slots [6] clear. • Service centre The warranty covers only claims for material and maufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e.g. buttons or batteries. This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. The warranty period will not be extended by repairs made unter warranty. This applies also to replaced and repaired parts. Any damage and defects extant on purchase must be reported immediately after unpacking the appliance, at the latest, two days after the purchase date. Repairs made after the expiration of the warranty period are subject to payment. g WARnIN ¡G3 Have youQRevice repaired only by qualified specialist personnel using original manufacturer parts only. This will ensure that your device remains safe to use. 3 Warning! if the plug or mains lead needs to be replaced, always GB DES UK LTD Tel.: 0871 5000 700 (£ 0.10 / minute) e-mail: support.uk@kompernass.com III PARKSIDE GB/IE 11 Warranty / Disposal / Declaration of Conformity / Manufacturer IE Kompernass Service Ireland Tel: 1850 930 412 (0,082 EUR/Min.) Standard call rates apply. Mobile operators may vary. e-mail: support.ie@kompernass.com • Disposal © The packaging is wholly composed of environmentally-friendly materials that can be disposed of at a local recycling centre. Do not dispose of electrical power tools with the household rubbish! • Declaration of Conformity / Manufacturer C€ We, KompernaB GmbH, the person responsible for documents: Mr Felix Becker, Burgstr. 21, D-44867 Bochum, Germany, hereby declare that this product complies with the following standards, normative documents and EU directives: Machinery Directive (2006/42 / EC) EC Low Voltage Directive (2006/95 / EC) Electromagnetic Compatibility (2004 / 108 / EC) In accordance with European Directive 2002/96/ EC (covering waste electrical and electronic equipment) and its transposition into national legislation, worn out electrical power tools must be collected separately and taken for environmentally compatible recycling. Contact your local refuse disposal authority for more details of how to dispose of your worn out electrical devices. Applicable harmonized standards EN 60745-1:2009, EN 60745-2-4:2009, EN 62233:2008, IEC 60745-1:2006, IEC 60745-2-4/A1:2008, EN 55014-1:2006, EN 55014-2/A2:2008, EN 61000-3-2:2006, EN 61000-3-3:2008 and confirm this with the CE symbol. ...