Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
Caution – electric shock! Dangerous electric current – danger to life! Keep children and other unauthorised personnel at a safe distance when using electrical tools. Explosive material! Keep the device away from rain or moisture. Water entering an electrical device increases the risk of electric shock. V~ Voltage Damaged appliances, power cables and power plugs mean potentially fatal risks from electric shock. Regularly check the condition of the appliance, the power cables and the power plugs. W Watts (Effective power) Dispose packaging and appliance in an environmentally-friendly way! Delta sander PDS 260 Q Introduction Please make sure you familiarise yourself fully with the way the device works before you use it for the first time and that you understand how to handle electrical power tools correctly. To help you do this please read the accompanying operating instructions. Keep these instructions in a safe place. If you pass the device on to anyone else, please ensure that you also pass on all the documentation. Q Proper use The device is intended for dry sanding and polishing of wood, plastic, metal, filler and painted surfaces. The device is particularly suitable for corners, profiles or difficult to access places. Any other use or modification to the device shall be considered as improper use and could give rise to considerable dangers. We will not GB accept liability for loss or damage arising from improper use. Not suitable for commercial use. Q Features and equipment 1 ON / OFF switch 2 Oscillation speed setting wheel 3 Mains lead 4 Dust extraction spout 5 Ventilation openings 6 Backing plate (360° rotatable) 7 Adapter for external vacuum extraction 8 Reducer piece Q Included items 1 Delta sander PDS 260 1 Sanding sheet 1 Adapter for external vacuum extraction 1 Reducer piece 1 Operating instructions 1 Booklet covering “Warranty and service” Introduction / General safety advice Q Technical information Nom. power input: 260 W Rated voltage: 230V 50Hz ~ Nominal speed: n0 6,000-11,000min-1 Nom. oscillation speed: n0 12,000-22,000min-1 Backing plate: 360° rotatable Protection class: II / Noise and vibration data: Values determined in accordance with EN 60745. The sound pressure level (A-weighted) of the device is typically 71,4dB(A). Uncertainty K=3dB. The sound level while working can exceed 85dB(A). Wear ear protection! Evaluated acceleration, typical: Hand/arm vibration ah = 2,309m/s2 Uncertainty K =1,5m/s2 WarNING! The vibration level given in these instructions has been measured in accordance with a standardised measurement procedure specified in EN60745 and can be used to compare devices. Different uses of the device give rise to different vibration levels and in many cases they may exceed the values given in these instructions. It is easy to underestimate the vibration load if the electrical power tool is used regularly in particular circumstances. Note: If you wish to make an accurate assessment of the vibration loads experienced during a particular period of working, you should also take into account the intervening periods of time when the device is switched off or is running but is not actually in use. This can result in a much lower vibration load over the whole of the period of working. ID:0000021432 General safety advice WarNING! Read all the safety advice and instructions! Failure to observe the safety advice and instructions may result in electric shock, fire and/or serious injury. KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE! 1. Workplace safety a) Keep your working area clean and clutter-free. Untidy or poorly lit working areas can lead to accidents. b) Do not work with the device in potentially explosive environments in which there are inflammable liquids, gases or dusts. Electrical power tools create sparks, which can ignite dusts or fumes. c) Keep children and other people away while you are operating the electrical tool. Distractions can cause you to lose control of the device. GB General safety advice 2. Electrical safety To avoid danger to life from electric shock: a) The mains plug on the device must match the mains socket. The plug must not be modified in any way. Do not use an adapter plug with devices fitted with a protective earth. Unmodified plugs and matching sockets reduce the risk of electric shock. b) avoid touching earthed surfaces such as pipes, radiators, ovens and refrigerators with any part of your body. There is an increased risk of electric shock if your body is earthed. c) Keep the device away from rain or moisture. Water entering an electrical device increases the risk of electric shock. d) Do not use the mains lead for any purpose for which it was not intended, e.g. to carry the device, to hang up the device or to pull the mains plug out of the mains socket. Keep the mains lead away from heat, oil, sharp edges or moving parts of the device. Damaged or tangled mains leads increase the risk of electric shock. e) When working...
Este manual também é adequado para os modelos :Máquinas e acabar - IEEE 802.3AF POE-1200 (3.82 mb)