Assessments - 3, GPA: 3.7 ( )

Fabricante : Haier Arquivo Tamanho: 616.61 kb Arquivo Nome : Língua de Ensino:

Before you plug in your appliance to the power socket, make absolutely sure that the voltage (V) and the safety fuse (A) for the main fuse box stated on the appliance's rating plate match your electrical supply. If these do not match, notify the nearest service department or your dealer Immediately. The appliance must not be connected up to an inverse rectifier (eg. solar panels). 6 Using your appliance Switching on / off and Selecting the Temperature Temperature dial (Thermostat) The temperature dial switches the appliance on and off and sets the cooling temperature. To switch on: Turn the temperature dial to the right. ■ The appliance has been switched on. ■ The compressor is activated until the set temperature inside the appliance has been reached. In the case of combined fridge I freezers, which are supplied with two compressors, you need to make sure, that both temperature dials for the fridge compartment and for the freezer, have been set. When setting the temperature for the freezer compartment, it is best to use a coin or a screwdriver. Temperature settings: Turn dial left to lowest setting = slight cooling Turn dial right to highest setting = lowest temperature The temperature must be set according to: ■ the appliance's room temperature ■ quantity of stored food ■ how often the appliance is opened We recommend a medium setting. You will soon leam, through observation, which is the most suitable setting for your requirements. Switching off: Turn the dial as far to the left as possible. ■ The compressor has been switched off Pilot lights If your appliance is equipped with pilot lights, they indicate the following: ■ green = CONTROL the appliance is connected to the electrical supply and is operating. ■ yellow = the SLIPERFREEZE SWITCH is on and the thermostat has been deactivated. The compressor continues to refrigerate, until the SUPER FREEZER SWITCH is switched off again. ■ red = ALARM the temperature in the freezer compartment is too warm i.e. has gone up. The green pilot light - when present - must always remain on when the appliance is connected up to the electrical supply and is switched on. It is very important to pay attention to this because in the event of a power failure, the red and yellow pilot lights stop operating and no longer provide a warning. If the red pilot light comes on there may be several reasons for this, namely: ■ The freezer compartment is being started up for the first time ■ It is being restarted after defrosting ■ The freezer has been refilled with fresh food In these cases it is quite normal for the red pilot light to be on. It goes off automatically when the temperature inside reaches approximately -18°C. Switch on (if provided) the SUPER FREEZE SWITCH (switch off again no more than 24 hours later or when the red light goes off). If possible, do not open the freezer compartment until the red light has gone off. If the red pilot light continues to remain on after 12 to 24 ...

Baixe o seu

Para fazer o download, introduza 2 dígitos :