Assessments - 5, GPA: 4.4 ( )

Fabricante : HP Arquivo Tamanho: 1.17 mb Arquivo Nome : Língua de Ensino:

Damaged O-Ring between oil chamber and motor plate C. Damaged cable ACTION A. Check power supply Check out electrical system for loose connections Check operating voltage B. Check circuit protectors C. Check external cable for damage – repair D. Inspect and remove jamming object E. Refer to Symptom 5 and 6 A. Check rating and replace with proper size B. Check current draw C. Verify connections. See wiring diagram D. Inspect external cable, replace if worn or damaged E. Remove obstruction F. Check rotation A. Clean motor housing B. Check control panel C. B. Replace the switch A. Check rotation B. Check liquid level C. Remove obstruction D. Check and adjust valve A. Check plug and sealing washer A. Replace seal B. Replace O-Ring C. Replace cable IF SYMPTOMS CONTINUE, CONSULT THE LIBERTY PUMPS PRODUCT SERVICE DEPT. FIGURE 2 CONTROL PANEL INSTALLATION FIGURE 3 TYPICAL INSTALLATION WITHOUT GUIDE RAIL WITH GR20 GUIDE RAIL PERFORMANCE CURVEOmnivore Grinders01020304050607080901001101201301401501601701801902000510152025303540455055FlOW (GPM) HEAD ( FEET) 0.04.38.713.017.321.626.030.334.639.043.347.651.956.360.664.969.373.677.982.386.60510152025303540455055HEAD (PSI) 1-1/4" PIPE1-1/2" PIPE2" PIPELSGX-SERIESLSG-SERIESIn order to ensure sufficient fluid velocity to carry solids, (generally accepted to be 2 feet per second) Maximum Total Dynamic Head is dependent on friction factors of the piping system. Consult factory for proper pump sizing. 1-800-543-2550 6. Liberty Pumps, Inc. warrants that pumps of its manufacture are free from all factory defects in material and workmanship for a period of 2 years from the date of purchase. The date of purchase shall be determined by a dated sales receipt noting the model and serial number of the pump. The dated sales receipt must accompany the returned pump if the date of return is more than 2 years from the "CODE" (date of manufacture) number noted on the pump nameplate. The manufacturer's obligation under this Warranty shall be limited to the repair or replacement of any parts found by the manufacturer to be defective, provided the part or assembly is returned freight prepaid to the manufacturer or its authorized service center, and provided that none of the following warranty-voiding characteristics are evident. The manufacturer shall not be liable under this Warranty if the product has not been properly installed; if it has been disassembled, modified, abused or tampered with; if the electrical cord has been cut, damaged or spliced; if the pump discharge has been reduced in size; if the pump has been used in water temperatures above the advertised rating, or water containing sand, lime, cement, gravel or other abrasives; if the product has been used to pump chemicals or hydrocarbons; if a non-submersible motor has been subjected to excessive moisture; or if the label bearing the serial, model and code number has been removed. Liberty Pumps, Inc. shall not be liable for any loss, damage or expenses resulting from in...

Baixe o seu

Para fazer o download, introduza 2 dígitos :