Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
Fit a sanding sheet. • Hold the tool in position right above the paper punch (7). • Press the tool with the sanding base (5) down into the paper punch. • Take the tool off the paper punch (7) and check whether the holes in the sanding sheet have been fully pierced. FITTING AND REMOVING THE DUST CANISTER (FIG. D) • Fit the dust canister (3) over the dust extraction outlet (4). • To remove the dust canister (3), pull the dust canister to the rear and off the outlet (4). ASSEMBLING AND FITTING THE SHAVINGS COLLECTION BAG (FIG. E) The shavings collection bag is particularly useful when working in confined spaces. Before first use, you will have to assemble the shavings collection bag. • Fit the wire frames (14) to the connecting plate (15) using the screws (16) and washers (17). • Pull the cloth bag (18) over the frame structure as shown. • Take care that the bag opening (19) is well fitted around the edge of the connecting plate (15). • Slide the connecting plate over the shavings discharge outlet (3). OPERATION WARNING: To reduce the risk of injury, let the tool work at its own pace. Do not overload. SWITCHING ON AND OFF (FIG. E) • To switch the tool on, press the part of the on/off switch (1) marked 'I'. • To switch the tool off, press the part of the on/off switch (1) marked '0'. EMPTYING THE DUST CANISTER (FIG. D) • The dust canister should be emptied every 10 minutes. • Pull the dust canister (3) to the rear and off the tool . • Remove the cover (2) by twisting it counterclockwise. • Hold dust canister with the filter (8) facing down and shake the canister (3) to empty the contents. • Shake the cover (2) to empty the contents. • Refit the cover (2) onto the dust canister (3), twisting it clockwise until it locks into place. • Fit the dust canister (3) onto the tool. CLEANING THE DUST CANISTER FILTER WARNING: To reduce the risk of personal injury, do not use compressed air to clean the filter. NOTE: Do not use a brush or sharp objects to clean the filter as these items can reduce the durability of the filter material. Do not wash the filter. • The dust canister filter (8) is re-usable and should be cleaned regularly. • Empty the dust canister (3) as described above. • Pull the dust canister filter (8) off the dust canister (3). • Shake off the excess dust by tapping the filter (8) into a trash can. • Replace the dust canister filter (8). • Fit the cover (2). • Fit the dust canister (3) onto the tool. HINTS FOR OPTIMUM USE • Do not place your hands over the ventilation slots. • Do not exert too much pressure on the tool. • Regularly check the condition of the sanding sheet. Replace when necessary. • Always sand with the grain of the wood. • When sanding new layers of paint before applying another layer, use extra fine grit. • On very uneven surfaces, or when removing layers of paint, start with a coarse grit. On other surfaces, start with a medium grit. In both cases, gradually change to a fine grit for a smooth finish. DUST COLLECTION WARNING: Fire hazard. Collected sanding dust from sanding surface coatings (polyurethane, linseed oil, etc.) can self-ignite in sander dust canister or elsewhere and cause fire. To reduce risk, empty canister frequently and strictly follow sander manual and coating manufacturer's instructions. WARNING: Fire hazard. When working on metal surfaces, do not use the dust canister or a vacuum cleaner because sparks are generated.Wear safety glasses and a dustmask. Due to the danger of fire, do not use your sander to sand magnesium surfaces. Do not use for wet sanding. MAINTENANCE Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid. IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts. WARNING: The use of any accessory not recommended for use with this tool could be hazardous. PROTECTING THE ENVIRONMENT Separate collection. This product must not be disposed of with normal household waste. Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection. Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials. Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product. SERVICE INFORMATION Black & Decker offers a full network of company-owned and authorized service locations. All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you nee...