7. Operation Read operating instructions before operating the shredder. Insert plug in power outlet. To avoid motor overload, the paper shredders may cut out automatically after approx. 20 minutes of continuous operation. Switching equipment ON 1 – Press rocker switch to pos. (1) • Controller switch locks in "on" position. • Equipment is ready for operation (standby). – Feed paper • The shredding process is started by automatic start stop control in the paper feed opening. Insert paper and shred

We have made many improvements in our commercial shredder since its introduction in 1982. We are confident that it offers you the greatest value for your money in its product category today. We hope it meets – or even exceeds – your expectations. To ensure years of safe, efficient use, please read these few pages about your new shredder. If this manual doesn’t answer all your questions or if you wish to comment on this product, we welcome your call or letter. Sincerely, James Fellowes Chairman &

. . . . . . . . . . . . . . . . . . . Warranty . . . . . . . . . . . . . . . . . . . . . . Product Profile This product is built to shred paper, staples, small paper clips and credit cards. It is not built to shred adhesive labels, transparencies, newspaper, cardboard, large paper clips, or plastic (other than credit cards). Attempting to shred items not intended for this shredder may cause damage. Strip- cut Confetti- cut (120-2/C-120) (120C-2/C-120C) Paper Sheet capacity* 18-20 sheets 12-14 sh

CAUTION: The shredder may be damaged if you alternate too rapidly between forward and reverse. • Unplug shredder and remove wastebasket drawer (A). – Carefully clear any paper shreds that have collected on under side of paper entry (C). CAUTION: Model 120C-2 (confetti cut model) has exposed blades.Use care when removing paper shreds on underside of paper entry. To clear a paper jam If paper jam light (J) is on, follow these steps until light turns off. • Check the waste basket and empty if full.

CAUTION: The shredder may be damaged if you alternate too rapidly between forward and reverse. • Unplug shredder and remove wastebasket drawer (A). – Carefully clear any paper shreds that have collected on under side of paper entry (C). CAUTION: Models 120C-2/C-120C (confetti cut model) has exposed blades.Use care when removing paper shreds on underside of paper entry. To clear a paper jam If paper jam light (J) is on, follow these steps until light turns off. • Check the waste basket and empty

3 – 8 Dechiqueteuse Fellowes 120/120 CC ............................................................ 9 – 14 Destructora de documentos Fellowes 120/120 CC ...................................... 15 – 20 Aktenvernichter Fellowes 120/120 CC .......................................................... 21 - 26 1.598.999.100 Edition 11/00 Contents 120 CC Contents Page 1. Important Safety Instructions .................................................................................. 4 2. Parts Identificat

3–8 Dechiqueteuse Fellowes 190/200/220/220 CC ................................................ 9–14 Destructora de documentos Fellowes 190/200/220/220 CC .......................... 15–20 Aktenvernichter Fellowes 190/200/220/220 CC .............................................. 21-26 1.294.999.110 Edition 09/98 200 220 Contents 220 CC Contents Page 1. Important Safety Instructions .................................................................................. 4 2. Parts Identification ........

Also, make sure that the total of all products plugged into the wall outlet does not exceed 15 amps. 11. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous live parts or other risks. 12. Unplug this product and refer servicing to qualified personnel under the following conditions: A) When the power cord or plug is damaged or frayed. B) If liquid has been spilled on the product. C) If the product has been exposed to rain. D) If the product d

– Shredder must be operated in upright position only. – Set up paper shredder so that the ventilation slots are unobstructed. To ensure sufficient ventilation of the shredder a minimum distance of 4" (10 cm) to the wall or to the furniture must be maintained. 7. Operation Read operating instructions before operating the shredder. Insert plug in power outlet. To avoid motor overload, the 190 and 200 model paper shredders may cut out automatically after approx. 20 minutes of continuous operation.

• Press rocker switch to center (2) 2 position. • Empty cut material container or exchange cut material bag. • Return switch to "on" position (1) and 1 continue shredding. 10. Maintenance (Cross cut unit only) – When tearing capacity drops or the noise increases: • Spray special cutting block oil onto cutting system. • Run cutting system forward (1) and 1 backward (3) several times without feeding paper. 3 • Continue shredding. Edition 09/98 1.294.999.110 USA 200 220 220 CC Paper shredder 11. Wa