Assessments - 6, GPA: 4.5
(
)
)
|
Fotos e especificações Juki HZL-F300 |
Facilidade de uso
Replace bulb with same type rated 3 Watts 12V." “WARNING To reduce the risk of burns, fire, electric shock, or inquiry to persons:” 1. “Do not allow this appliance to be used as a toy. Close attention is necessary when this appliance is used by or near children.” 2. “Use this appliance only for its intended use as described in this manual. Use only attachments recommended by the manufacturer as contained in this manual." 3. "Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment.” 4. “Never operate the appliance with any air openings blocked. Keep ventilation openings of the sewing machine and foot controller free from the accumulation of lint, dust and loose cloth." 5. “Keep fingers away from all moving parts. Special care is required around the sewing machine needle.” 6. “Always use the proper throat plate. The wrong plate can cause the needle to break.” 7. “Do not use bent needles.” 8. “Do not pull or push fabric while stitching. It may deflect the needle causing it to break." 9. "Switch the sewing machine off (“O") when making any adjustments in the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot and the like.” 10. “Always unplug sewing machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual.” 11. “Never drop or insert any object into any opening." 12. “Do not use outdoors.” 13. “Do not operate where aerosol (spray) products are being used or when oxygen is being administered.” 14. “To disconnect, turn all controls to the off (“O") position, then remove plug from outlet." 15. “Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.” “SAVE THESE INSTRUCTIONS” “This sewing machine is intended for household use only.” Use only foot controller JC-001 with your HZL-F300, HZL-F400 or HZL-F600. “The working temperature of sewing machine is from 5 to 40 degree Celsius. Do not use sewing machine under direct sunlight, near a heat source such as stove, iron, candle or any hot objects and in the place where temperature is high. Otherwise temperature inside sewing machine becomes high and/or vinyl of the power cord may be damaged, resulting in fire or an electric shock." “Always check a combination of material, thread and needle size. (Refer to page 24.) If the combination is not right, for example, sewing thick material such as denim with thin needle like size 11 and smaller, needle may break and it will cause injury to your body." 1 Thank you for purchasing our products. To safely and properly use this product, please read the instruction manual carefully and understand the properties of this computer sewing machine. This machine is composed of well-chosen brand-name parts and is well quality controlled. Please try a variety of different sewing methods and have fun. FOR USA AND CANADA ONLY This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way. As the microcomputers), semi-conductor(s) and precise wiring board(s) is built in this sewing machine, please pay attention that the following condition^) may occur. • Use this product in a temperature between 5 and 40 degree Celsius. If temperature is extremely low, this sewing machine may not work properly. • This sewing machine will stop due to safety mechanism to prevent the machine from overheating, when it sews slowly and for a long time. In this event, Start and Stop button will not light. The sewing machine will return to working condition after about 10 minutes. 2 ( Contents Important safety instructions..............................1, 2 Principal parts...............................................................5 Accessories.....................................................................6 Basic opérations Function of operational buttons.................................7 Connecting to the power supply..............................8 Name and function of other operational buttons........................................................................9,10 Speed control...............................................................11 Presser foot lifting lever and installation of knee lifting lever.........................................................12 Changing the presser foot..............................13, 14 Bobbin thread preparation..............................15-18 Needle thread preparation......................
Este manual também é adequado para os modelos :Máquinas de costura - HZL-F600 (5.2 mb)