Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Manually pass the thread through the eye of the needle from the front to the back. For details, refer to “ Threading the needle manually“ (page 25) 2 Attach monogramming foot “N”. • For details, refer to “ Replacing the presser foot” (page 35). 3 Select a stitch. The stitches that can be used are , , , or . • For details, refer to “ Selecting stitching” (page 58). • Select a stitch width of 6.0 mm (15/64 inch) or less. 4 Start sewing. CAUTION . Select a stitch width of 6.0 mm (15/64 inch) or less, otherwise the needle may bend or break. . After adjusting the stitch width, slowly turn the balance wheel toward you and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. Partially removing threads is called “ drawnwork” . This gives a beautiful result with fabrics that have a loose weave. Two ways to create drawnwork are described below. ¦ Drawnwork (Example 1) The fabric is turned and sewn twice 1 Pull out several threads from the fabric. 92 S2_brotherE.book Page 93 Thursday, February 13, 2003 11:03 AM 2 Attach monogramming foot “N”. • For details, refer to “ Replacing the presser foot” (page 35). 3 Select stitch . • For details, refer to “ Selecting stitching” (page 58). 4 With the right side of the fabric facing up, sew along the right edge of the frayed section. N 5 Turn the fabric around to sew the opposite side. 6 Sew along the other edge of the frayed section so that it looks like the previous stitching. N ¦ Drawnwork (Example 2) 1 Pull out several threads from two sections of the fabric, separated by an unfrayed section of about 4 mm (3/16 inch). 3 1 1 4 mm (3/16 inch) 2 Attach monogramming foot “N”. • For details, refer to “ Replacing the presser foot” (page 35). 3 Select stitch . • For details, refer to “ Selecting stitching” (page 58). 4 Sew along the center of the unfrayed section. N Decorative Stitching 93 S2_brotherE.book Page 94 Thursday, February 13, 2003 11:03 AM UTILITY STITCHES 94 S2_brotherE.book Page 95 Thursday, February 13, 2003 11:03 AM 4 APPENDIX The various maintenance and troubleshooting procedures are described in this chapter. Stitch Settings ......................................................................................................... 96 Maintenance ........................................................................................................ 100 Troubleshooting ................................................................................................... 102 Error messages ..................................................................................................... 106 Changing the needle stop position ....................................................................... 107 Index ..................................................................................................................... 108 S2_brotherE.book Page 96 Thursday, February 13, 2003 11:03 AM APPENDIX Stitch Settings Applications, stitch lengths and widths and whether the twin needle can be used are listed for utility stitches in the following table. Utility stitches Stitch Name Pattern Presser FootApplication Stitch Width [mm (inch.)] Stitch Length [mm (inch.)] Twin NeedleReverse/ ReinforcementStitchingWalking FootSide cutter Auto Manual Auto Manual Straight stitch LeftJ Basic stitching, sewing gathers or pintucks, etc. 0.0 (0) 0.0– 7.0 (0– 1/4) 2.5 (3/32) 0.2– 5.0 (1/64– 3/16) No Reverse No Yes CenterJ/I Attaching zippers, basic stitching, sewing gathers or pintucks, etc. – – 2.5 (3/32) 0.2– 5.0 (1/64– 3/16) Yes Reverse No No Triple stretch stitch J Attaching sleeves, sewing inseams, sewing stretch fabrics and decorative stitching 0.0 (0) 0.0– 7.0 (0– 1/4) 2.5 (3/32) 1.5– 4.0 (1/16– 3/16) No Reinforcement No No Stretch stitch J Sewing stretch fabrics and decorative stitching 1.0 (1/16) 1.0– 3.0 (1/16– 1/8) 2.5 (3/32) 1.0– 4.0 (1/16– 3/16) Yes Reinforcement No No Zigzag stitch J Overcasting and attaching appliques 3.5 (1/8) 0.0– 7.0 (0– 1/4) 1.4 (1/16) 0.0– 4.0 (0– 3/16) Yes Reverse No No 3-point zigzag stitch J Overcasting on mediumweight or stretch fabrics, attaching elastic, darning, etc. 5.0 (3/16) 1.5– 7.0 (1/16– 1/4) 1.0 (1/16) 0.2– 4.0 (1/64– 3/16) Yes Reinforcement No No Overcasting stitch G Overcasting on thin or mediumweight fabrics 3.5 (1/8) 2.5– 5.0 (3/32– 3/16) 2.0 (1/16) 1.0– 4.0 (1/16– 3/16) No Reinforcement No Yes G Overcasting on thick fabrics 5.0 (3/16) 2.5– 5.0 (3/32– 3/16) 2.5 (3/32) 1.0– 4.0 (1/16– 3/16) No Reinforcement No Yes J Overcasting on stretch fabrics 5.0 (3/16) 0.0– 7.0 (0– 1/4) 2.5 (3/32) 0.5– 4.0 (1/32– 3/16) Yes Reinforcement No No Blind hem stitch R Blind hem stitching on mediumweight fabrics 0.0 (0) +3– – 3 2.0 (1/16) 1.0– 3.5 (1/16– 1/8) No Reinforcement No No R Blind hem stitching on stretch fabrics 0.0 (0) +3– – 3 2.0 (1/16) 1.0– 3.5 (1/16– 1/8) No Reinforcement No No Applique stitch J Applique stitching 3.5 (1/8) 2.5– 5.0 (3/32– 3/16) 2.5 (3/32) 1.6– 4.0 (1/16– 3/16) ...
Este manual também é adequado para os modelos :Máquinas de costura - CS-80 (4.43 mb)