Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Otherwise, injuries may occur if the foot controller is accidentally pressed and the machine starts sewing. Zipper insertion Stitch Name Pattern Stitch Length [mm (inch)] Stitch Width [mm (inch)] Foot Straight Stitch 2 2-3 (1/16-1/8) 2.5 (center) (3/32) Zipper Foot “I” You can use the zipper foot “I” to sew different types of zippers, and can easily position it to the right or left side of the needle. When sewing with the zipper on the right side, attach the shank to the left pin of the zipper foot. When sewing with the zipper on the left side, attach the shank to the right pin of the zipper foot. I 3 1 2 4 1 Right pin for sewing with the zipper on the left side 2 Left pin for sewing with the zipper on the right side 3 Needle drop point for sewing with the zipper on the left side 4 Needle drop point for sewing with the zipper on the right side 1 Prepare the fabric with the zipper basted on the wrong side. 1 2 3 4 1 5 3 4 1 Basting stitching 2 Reverse stitches 3 Wrong side of fabric 4 End of zipper opening 5 Zipper 2 Turn off the machine. Attach the zipper foot “I”. CAUTION . Turn the handwheel toward you (counterclockwise) and check that the needle does not touch the zipper foot before you start sewing. Choosing a different stitch will cause the needle to hit the presser foot and break, and you may be injured. 3 Turn on the machine. CAUTION . Do not turn on the machine while pressing down the foot controller. 4 With the right side of the fabric facing up, continue sewing with the zipper on the right side of the presser foot. 1 2 3 1End of zipper opening 2Basting stitching 3Zipper • Sew the stitching in order, from 1 to 3. CAUTION . Make sure the needle does not hit the zipper during sewing. If the needle hits the zipper, the needle may break and you may be injured. 5 When you have finished sewing, remove the basting stitching. 40 USING ATTACHMENTS AND APPLICATIONS USING ATTACHMENTS AND APPLICATIONS Gathering CAUTION Stitch Name Pattern Stitch Length [mm (inch)] 2 Straight Stitch 4 (3/16) 1 Loosen the tension of the upper thread so that the lower thread lies on the underside of the material. 2 Sew a single row (or many rows) of straight stitches. 3 Pull the lower threads to gather the material. Darning Stitch Name Pattern Stitch Length [mm (inch)] Other Straight Stitch 2 Any Darning Plate 1 Turn off the machine. Place the darning plate on the needle plate. 2 Either remove both the presser foot and presser foot holder assembly and then lower the presser foot lever. 3 Put the section you want to darn under the presser foot together with fabric for reinforcement. 4 Turn on the machine. . Do not turn on the machine while pressing down the foot controller. 5 Begin sewing by alternating between gently drawing the work away from you and pulling it toward you. Note . Sew while holding the fabric stretched in order to keep the fabric held down. 6 Repeat this motion until the darn section is filled with parallel lines of stitching. Appliques Stitch Name Pattern Stitch Length [mm (inch)] Stitch Width [mm (inch)] Zigzag Stitch 3 F-2 (1/64-1/16) Any You can create an applique by cutting a different piece of fabric into a shape and using it as a decoration. 1 Baste the cut design to the fabric. 2 Carefully sew around the edge of the design with a zigzag stitch. OPTIONAL ACCESSORIES OPTIONAL ACCESSORIES Using the walking foot Stitch Name Pattern Stitch Length [mm (inch)] Stitch Width [mm (inch)] Straight Stitch 2 1-4 (1/16-3/16) 2-3 (1/16-1/8) Zigzag Stitch 3 1-4 (1/16-3/16) 0-5 (0-3/16) The walking foot is very useful for sewing materials such as vinyl cloth, synthetic leather, thin leather, etc. These materials are difficult to feed when sewing. The walking foot prevents these materials from crumpling, slipping or sticking between the presser foot and the material. Note . Only use the walking foot with straight or zigzag stitches. Do not use other patterns. Reverse stitches can not be sewn with the walking foot. 1 Turn off the machine. 2 Raise the needle and the presser foot. 3 Loosen the presser foot screw to remove the presser foot holder. 3 2 1 1Use the oval screwdriver 2Presser foot holder 3Presser foot screw 4 Hook the connecting fork of the walking foot onto the needle clamp screw. 1 2 1 Connecting fork 2 Needle clamp screw 5 Lower the presser foot lever and then tighten the presser foot screw. CAUTION1 1 Presser foot screw . Use the oval screwdriver to tighten the screw securely. If the screw is loose, the needle may hit the presser foot and you may be injured. . Turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. Note . When sewing with the walking foot, sew at medium to low speeds. 42 USING ATTACHMENTS AND APPLICATIONS USING ATTACHMENTS AND APPLICATIONS Using the quilting guide Use the quilting guide to sew parallel stitches that are equally spaced. 1 Insert the stem of the quilting guide in...
Este manual também é adequado para os modelos :Máquinas de costura - XL3700 (16.3 mb)