Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
S. A. LIST OF PARTS MACHINE №. 105-20 THE SINGER MANUFACTURING COMPANY Copyright, U. Я. A., 1932 and 1933, ну The Sinueü Manufacturing Co. Аьь Rights Ru.served for all Countries INSTRUCTIONS FOR OILING Before starting the machine apply Singer Cloth and Leather Oil to all oil holes and bearings. Particular care should be taken to see that a sufficient quantity of oil is poured into the oil hole leading to the oil reservoir at the back of the machine. The main bearings of the machine are lubricated by means of this oil reservoir which should be kept filled with oil. When the machine is in continuous use, it should be oiled frequently. Genuine Singer Needles should be used in Singer Machines. These Needles and their Containers are marked with the Company’s Trade Mark “SIMANCO.” 1 Needles in Containers marked “For Singer Machines” are not Singer made needles. 2 INDEX PAGE Accessoiiies..................................... 14 Kl)(iE Koldeu................................... 14 Knkb Liftek Pakts............................. 14 Machine Bask.................................. 15 Machine No. 105-20............................ 7 Numerical List of Paiits....................... 17 Thuead Unwindeii............................... 15 INSTRUCTIONS FOR ORDERING In ordering from this list, use ONLY the part NUMBER in the FIRST column. The number stamped on a Sewing Machine Part is in every case the number of the single part only. livery combination of parts sent out as such has its specific number, which, although not stamped on the parts, must be used when ordering the combination. Each number always indicates the SAME PART in whatever list it appears, or for whatever machine. Plie letters after some of the numbers indicate the style of finish only, as follows: A—Hardened, Polished, Nickel Plated and Buffed B—Polished, Nickel Plated and Buffed O—Hardened Only 1)—Polished Only ft—Soft, Not Polished F—Hardened and Polished H—Blued J—Nickel Plated Only K—Hardened and Nickel Plated L—Brass I Mated M—Oxidized N—Japanned, Dull P—Japanned, Bright R—Merlized T—Copper Plated T. A.—Hardened, Polished, Copper and Nickel Plated and Buffed T. B.—Copper and Nickel Plated and Polished T. J.— Copper and Nickel Plated Only T. K.— Hardened, Copper and Nickel Plaled T. M.—Copper Plaled and Oxidized T. L—Copper and Brass Plated IJ —Zinc Plated V-—Silver Plated W—Polished and Nickel Plaled Y Black Nickel Plated Only Z—Chromium Plaled Z. B.—Polished, Nickel Plated, Huffed and Chromium Plated Z. J.—Nickel and Chromium Plated These letters MUST lift USftl.) when they appear in the list; and AFTER the number as in the list. In this series: 1 to 1500 and 50001 to 51500 are Screw Numbers 1501 to 1800 and 51501 to 51800 are Nut Numbers 1801 to 2000 and 51801 to 52000 are Roller Numbers 2001 to 50000 and 52001 and upward are numbers of Machine Paris The figures in the second column refer only to the plates, illustrating the parts, and are NOT TO lift USED in ordering. Parts marked with an asterisk (*) are furnished only when repairs are made at factory. When ordering parts which differ as to Gauge (the distance between seams) (he (iauge, as well as the Number must be given on order. 7 LIST OF PARTS COMPLETE FOR MACHINE No. 105-20 FOR HEMMING SILK GLOVES AND SIMILAR WORK IN LIGHT MATERIAL. TWO NEEDLES, ONE LOOPER. GAUGES % AND Vs INCH. BALANCE WHEEL No. 59208. DIAMETER OF BELT GROOVE 2% INCHES. SPEED 3500. NO. 1>LATK NAME *59399 ----- Ann, upper and lower (solid) with 15401 and two 15105....................... 59401 7365 Arm Rotary Shaft..................... 59523 7355 “ “ “ Bushing (back) with 52045.............................. 52045 7355 Ann Rotary Shaft Bushing (back) Packing (cotton)............................ 1285c 7304 Ann Rotary Shaft Bushing (back) Set Screw.............................. s PARTS FOR MACIIINK No. 105-20 NO. ['I.ATK NAME 50521 7355 Arm Rotary Shaft, Hushing (front) with 52045.............................. 52015 7355 Ann Rotary Shaft Hushing (front) Packing (cotton')............................ 448c 7304 Ann Rotary Shaft Bushing (front) Set Screw.............................. 50525 7355 Arm Rotary Shaft Bushing (intermediate) with 52015.......................... 52015 7355 Arm Rotary Shaft Bushing (intermediate) Packing (cotton)..................... 1285c 7361 Arm Rotary Shaft Bushing (intermediate) Set Screw........................... 50207 7365 Arm Side Cover....................... 1423j 7364 “ “ “ Screw.................. 59208 7365 Balance Wheel, 25,6 in. diam., with 424c and 1354c........................... 1351c 7364 Balance Wheel Position Screw........... 424c 7364 “ “ Set Screw............... 59101 7367 Cloth Plate with 59292................. 59307 7365 “ Slide (left)................. 59308 7365 “ (right)................. 59292 7364 “ “ Steady Pin.................. 59102 ------ Cloth Plate complete, Nos. 59307, 59308 and 59401.............................