Assessments - 1, GPA: 4 ( )

Fabricante : Roland Arquivo Tamanho: 5.43 mb Arquivo Nome : Língua de Ensino:

First, you need to get ready for installation of the driver. ¦Setup guide (this document) Read this rst. It takes you through the steps for connecting the PCR to your computer, and playing sound from your computer. . The photo shows the PCR-500. Copyright © 2007 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. Cakewalk Production Plus Pack Installation . No sound! Is the PCR connected correctly? Re-connect the PCR’s USB cable to your computer. Is the PCR’s power switch set correctly? Make sure that the PCR’s power switch is set to the USB position. Could the main volume of your Mac be turned down or muted? In “System Settings,” choose Sound Output and increase the main volume or defeat muting. Is the sound output port set correctly on your Mac? In “System Settings,” choose Sound Output and then select Internal Audio. Are you using headphones? Make sure that your headphones are correctly connected to the headphone jack of your Mac. Is an audio interface connected to your Mac? Refer to the owner’s manual for your equipment to check whether the audio interface is set correctly. No sound with applications other than GarageBand. Depending on the application you’re using, you may need to make MIDI and audio input/output settings. For details on MIDI input/ output settings, refer to the owner’s manual for the application you’re using, and select the PCR’s MIDI device (port 1). Try installing the most recent version of the driver. If the Roland website (has a more recent version of the driver, use the most recent version. . . . . . . . . Other side Can’t install the driver! Could another USB device be connected? Be sure to disconnect all USB devices (other than a mouse and/or keyboard) when you perform the installation. When you connect the PCR, connect it directly to a USB connector located on the computer itself. If you connect the PCR to a USB connector located on your computer keyboard, the PCR may not operate reliably. Could other software or background software (such as antivirus programs) be running? The installation may not occur correctly if other programs are running. Be sure to exit all other programs before you perform the installation. . . For more detailed information, refer to Troubleshooting in the owner’s manual. Windows Vista Windows XP/2000 2 Prepare for the installation Insert the included CD-ROM into your computer. Start up the installer for the Windows driver. Choose [start] — [My Computer]. Double-click “DVD/CD-ROM drive.” Double-click the “DRIVER” folder. Double-click the “SETUP” icon within the “XP2K” folder. Click [Next] as directed by the “Driver Setup” dialog box. The “Driver Setup” dialog box will open; click [Next] as directed in the screen. To begin the installation, click [Next] once again. If a dialog box regarding Windows logo testing appears, click [Continue Anyway]. If a dialog box with the message “Digital signature Not Found” appears, click [Yes]. If you are unable to continue, click the [OK] button, and refer to “Troubleshooting” in the Readme le included with the driver. A dialog box with the message “Ready to install the driver” will appear. You are now ready to install the driver. 1 2 1. 2. 3. 4. 3 1. 2. 3. Install the driver and make connections Connect the PCR to your computer using the USB cable. Set the PCR’s power switch (POWER) to the “OFF” position. Use the USB cable to connect the PCR to your computer. Turn on the power of the PCR. Set the PCR’s power switch (POWER) to the “USB” position. The message “Found New Hardware” will appear near the taskbar, then the “Found New Hardware Wizard” will open. If the Found New Hardware Wizard asks whether you want to connect to Windows Update, choose “No, ...” and then click [Next]. Choose the installation method. Choose “Install the software automatically (Recommended),” and click [Next]. If a dialog box regarding Windows logo testing appears, click [Continue Anyway]. If a dialog box with the message “Digital signature Not Found” appears, click [Yes]. Click [Finish] to complete the installation. Make sure that “EDIROL PCR” is shown, and click [Finish]. In the “Driver Setup” dialog box, click [Close]. If the “System settings have changed” dialog box appears, click [Yes] to restart Windows. Driver installation is now complete. 1 1. 2. 2 1. 2. 3 1. 4 1. 2. 3. 1 SONAR Logic Control Map Cubase :: etc... 2 3 ? 3 4 Connections and installation (Windows Vista/XP/2000) Prepare for the installation Insert the included CD-ROM into your computer. Start up the Windows driver installer. Choose [Start] — [Computer]. Double-click the “DVD/CD-ROM drive.” Double-click the “DRIVER” folder. Double-click the “Vista” folder. Double-click the “Setup” icon. If a user account control window appears, click [Continue]. The screen will indicate “EDIROL PCR Driver will be installed on your computer.” Click [Next]. If any other me...

Baixe o seu

Para fazer o download, introduza 2 dígitos :