Assessments - 4, GPA: 4 ( )

Fabricante : Panasonic Arquivo Tamanho: 4.42 mb Arquivo Nome : SXF100.PDF Língua de Ensino:

malfunction. • Turn off the POWER button once, then turn it on again. If this procedure is not successful, turn off the POWER button once. Then, while pressing the three lower left buttons in the RHYTHM GROUP section (BALLAD POP, TRAD DANCE and MODERN DANCE) at the same time, turn the POWER button on again. (Note that, in this case, all programmable settings, functions and memories return to their factory-preset status.) Cfl U 0) © No sound is produced when the keys are pressed. • The MAIN VOLUME is at the minimum setting. Adjust the volume with the MAIN VOLUME control. • The volumes for the selected parts are set to the minimum levels. Use the balance buttons to set the volumes of the relevant parts to appropriate levels. (Refer to page 29.) • The local control for a part performed on the keyboard is set to OFF. Set the local control to ON. (Refer to page 146.) "D C <0 Multi-track storage is not possible. The playback track has been selected, but the START/STOP button has not been pressed. A flashing track indicator shows the track which is ready for recording, and a lit track indicator shows a track which is ready for playback. To record one track while listening to another (playback) track, press the START/STOP button to begin playback. (Refer to page 73.) The playback measure indication is different from when the performance was recorded. The number of measures corresponds to the time signature of the rhythm selected at the start of recording. To change the rhythm in the middle of the song, record the rhythm change in the RHYTHM part. (Refer to page 78.) o cc O z Ü >• < No sound is produced for the automatic accompaniment. In the RHYTHM GROUP section, a rhythm in COMPOSER A or COMPOSER B with no stored pattern was selected. Select a different rhythm. No sound is produced for the automatic accompaniment, or only the sounds of some parts are produced. * Some or all of the ACCOMP 1, 2 and 3 buttons are turned off. Press the buttons to turn them on. Storage is not possible. The remaining memory capacity of the COMPOSER is 0. cc LD CO o Q. s o Ü Setting the time signature and number of measures is not possible. • The time signature and number of measures cannot be changed for a pattern which is currently recorded in the COMPOSER. If you wish to change the time signature and/or measure data, first follow the procedure to clear the memory. (Refer to page 97.) The playback timing of the rhythm pattern is different from the timing with which it was recorded. • The QUANTIZE function was on when the pattern was recorded and the timing was automatically corrected. Set the quantize level to a smaller note unit or to OFF when recording. (Refer to page 99.) (0 The Disk Drive produces a noise during recording or playback. • This occurs when the Disk Drive is reading a disk. It does not indicate a problem. When the procedure to load from a disk is performed, the contents of the keyboard memory are erased. When performing the load operation from a disk, the keyboard memory changes ...

Baixe o seu

Para fazer o download, introduza 2 dígitos :