Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
LEFT (L) and CHORD (C). 33 QQTG0586 Part III Recording Multiplex recording Multiplex recording of the MELODY mode and APC REAL mode is possible by repeating steps 1 to 6. • In multiplex recording, recording cannot be started by playing the keyboard. You must press the START/STOP button to begin recording. Playing back your recorded song button. 2.Press the PLAY/PAUSE (START/STOP) button. • Your recorded performance is played back. • For information about the function of each button during playback, refer to page 37. • If you wish to play back the rhythm, turn the PLAY button off. • This step is not necessary if the PLAY indication already appears on the display. Store a chord progression Store the chord progression for the AUTO PLAY CHORD in the track for the CHORD part. Then, when the AUTO PLAY CHORD is used during playback, even if you do not specify the chords with your left hand, the chords change automatically. • The chord length is specified with the CHORD STEP RECORD keys on the keyboard. Correction keys ^ Move back one step. ► Move forward one step. Repeat key Press to end the chord-storing procedure and to specify automatic repeat playback of the stored progression. End key —h Press after the whole chord progression has been stored. DELETE key delete Press to erase data. • To erase all the data from the current track, while J Quarter-note pressing the DELETE key, press the End key Eighth-note ( H )• Reset key Press to begin storing from the beginning. • Note that executing this procedure will delete the recorded APC REAL data. OELETt - J> J ► j. Note value keys t, Whole note J. Dotted half-note J Half-note Dotted quarter-note 1. In the SONG section, press the PLAY SONG PLAY A EC 34 QQTG0586 Part III Recording 1 .In the SONG section, press the REC button . 2.Use the TRANSPOSE/PROGRAM buttons to select 4: APC STEP. 3. Press the EXECUTE button. 4.While playing a chord with your lett hand, press the desired note value key with your right hand to specify the chord length. Repeat this step to store all the chords. • When a note value key is pressed, a “beep” tone indicates that the chord has been stored. • Store a rest by pressing a note value key without specifying a chord. • The display during chord recording: Measure number Beat number • To make corrections to the recorded chord progression, use the ^ and > keys or TRANSPOSE/PROGRAM button to display the chord you wish to modify. Next, press the DELETE key to erase the stored chord and then store a new chord. When you use the DELETE key to erase a chord, the recorded contents that follow are shifted forward by the note value of the deleted chord. • To go to the end of the chord progression, while pressing the Reset key (i‘4—), press the ► key. • The CHORD FINDER feature, which shows you how to finger a specified chord, is available. (Refer to page 30.) 5.At the end of the chord progression, press the End key ( —H ). • The instrument exits the recording mode. • If you wish automatic repeat playback of the chord progression, press the Repeat key ( c^z>) instead of the End key ( —H ). • To store chords using the 1 Finger mode, select this mode before beginning the recording procedure. (Refer to page 29.) Chord name • The beat number is indicated in increments of J>. For example, “B3.5’’ indicates 3-1/2 beats. • You can press the INTRO [INTR], FILL IN [FIL 1/2] or ENDING [ENDG] button to store the corresponding pattern. (An INTRO or COUNT INTRO can be stored only at the beginning.) When storing a pattern or searching for a pattern, the abbreviated name is shown within square brackets [ ]. Note • When the recording procedure is performed, the previously recorded contents and song data loaded from a song disk as well as BEAT MASTER data are erased. • You cannot record more than 999 measures. • The total recording capacity of all tracks combined is approximately 4500 notes. • When “MEM FULL” appears on the display, no more data can be stored and recording ends automatically. • You cannot begin recording from the middle of a song. • The playback volume can be adjusted. (Refer to page 29.) • Specific tracks can be muted so they are not played back. (Refer to pages 41 and 43.) • If you wish to keep your recorded performance, save it to a floppy disk. (Refer to page 38.) • If you record in the MELODY mode on top of the chord track (C) in which the ending pattern is stored, recording will automatically end at that point. 35 ÛQTG0586 Part IV Disk Drive A 3.5 inch disk drive is built into this instrument, so you can play back the included disk and commercially sold song disks, as well as store your recorded performances on floppy disks and play them back. Parts oi the floppy disk drive Disk slot Eject button Press to remove the disk from the Disk Drive. An illustration of a floppy disk appears on the display when data is being loaded from or saved to a disk. To prevent data loss, do not...