Assessments - 2, GPA: 5
(
)
)
|
Facilidade de uso
• If there are SMF files on the disk and you wish to load an SMF file, press the SMF button. (Refer to next page.) 4. Press the LOAD button. • The LOAD operation begins. • When the operation has been successfully completed, “COMPLETED!” is shown on the display. • If song data was loaded, you can press the START/STOP button to begin playback when the SEQUENCER PLAY display is active. • You can load the type of data for which only one song can be recorded in the SEQUENCER. (This type is available for disks used with older Technics models.) Note, however, that in this case, the song is loaded into SONG 1, but the data in SONG memories 2 to 10 are erased. • You can also access the LOAD display by pressing the DISK button for a few seconds. . LOAD OPTION Specify the kind of data you wish to load from the disk to your instrument. 1. Use the PAGE buttons to access the PAGE 2/3 LOAD OPTION display. • The display looks similar to the following. 2. Use the buttons below the display to specify the types of data you wish to load (YES/NO). • -----indicates that this type of data has not been saved. • This setting is canceled when you quit the LOAD display or when another file is selected. 3. Press the LOAD button. • The LOAD operation begins. . SINGLE LOAD You can specify which data to load from a disk into a specific PANEL MEMORY, COMPOSER (MEMORY), SOUND MEMORY, EFFECT MEMORY or SEQUENCER (when SONG SAVE was executed) memory. 1. Use the PAGE buttons to access the PAGE 3/3 SINGLE LOAD display. • The display looks similar to the following. 2. Use the MODE button to select the data you wish to load. 3. Use the BANK/SINGLE button to select the load increment. (except for SEQUENCER) BANK: Load one bank at a time. SINGLE: Load the smallest data increment. 4. Follow the appropriate procedure to load the specified data. • Specify the data source for SONG (left side), and the data destination (this instrument’s memory location) for TO. Disk Drive 93 QQTG0701 Part V Disk Drive Disk Drive . SMF LOAD Load data which was saved in the “Standard MIDI File” (SMF) format. 1. On the LOAD (PAGE 1/3) display, press the SMF button. • The display looks similar to the following. • For disks which contain SMF files only, this display appears automatically when LOAD is selected on the DISK MENU display. 2. Use the buttons below the display to select the filename you wish to load. • If the number of files is 10 or more, you can use the PREV and NEXT buttons to go back or advance 10 files at a time. • If you press the TECH button, the display changes to the LOAD display for Technics format. • You can use the INFORMATION button to switch the displayed data. DISK: Disk name SONG: Song name 3. Use the TO SONG button to select the number to load to (this instrument’s SEQUENCER song number). • Songs to load are specified one at a time. • The song name to load to is shown below the TO SONG button. 4. Use the LOAD AS button to specify the load method. Select from the following. GM/GM2 > GM2: Activate the GM2 initialized settings, and load GM/GM2 data. NX > NX: Active the NX SOUND settings, and load NX data. GM/GM2 > NX: Activate the NX SOUND initialized settings, and load GM/GM2 data. PREV. TEC > NX: Activate the NX SOUND initialized settings, and load SMF data that was saved in the TECHNICS mode on a previous model. (The volume balance and octave settings may differ from the saved settings.) • If you select the setting which is different from that in which the song was stored, the sounds, octaves, and arrangement of percussion instrument sounds, etc. will be different. 5.Press the LOAD button. • The LOAD operation begins. • When the operation has been successfully completed, “COMPLETED!” is shown on the display. • If you press the START/STOP button, playback of the loaded data begins. • During the LOAD operation, data that cannot be processed by this instrument is ignored. . COMPOSER LOAD Load COMPOSER data only from a disk. 1.In the RHYTHM GROUP section, press and hold the LOAD (MEMORY) button for a few seconds. RHYTHM GROUP FUNK & BALLROOM METRONOME POP ROCK SOUL DISCO POP BALLAD BALLAD & SHOW MEMORY LATIN & WORLD JAZZ & SWING WALTZ & TRADUSA16 BEAT8 BEAT LOAD • The display looks similar to the following. 2.Select the name of the file you wish to load. 3.Press the LOAD button. • Data is loaded to this instrument’s COMPOSER memory (MEMORY). 94 QQTG0701 Part V Disk Drive Direct Play You can enjoy immediate playback of “Standard MIDI File” (SMF), “Disk Orchestra Collection” (DOC) and “PianoDisc” disks—all without loading the song data. 1. Insert the disk with the stored data into the Disk Drive. 2. On the DISK MENU display, select DIRECT PLAY. • The display looks similar to the following.