Assessments - 5, GPA: 3.8 ( )

Fabricante : Panasonic Arquivo Tamanho: 4.66 mb Arquivo Nome : SXPR604.PDF Língua de Ensino:

• After this procedure, please do not change the song number. • For details about SEQUENCER operation, refer to page 61. • For information about loading data, refer to page 96. 2. Press the PROGRAM MENUS button to turn it on. 3. Select PIANO PERFORM PADS. 4. Select SEQ TO PAD COPY. • The display looks similar to the following. 5. Select the measures of SEQUENCER data you wish to copy from. • On the SEQUENCER side, use the . and . buttons to make the corresponding settings. FIRST MEAS: The first measure of the phrase you wish to copy. LAST MEAS: The last measure of the phrase you wish to copy. TRANSPOSE: The setting to transpose the chords when they are copied. • The maximum that can be copied is 16 measures. • When copying to pad button 5 or 6, the chord track is automatically displayed, and the chord data is also copied. However, when chord data from step record input does not exist, the measures are blank. In this case, PART 2 cannot be used. • If you wish to convert the chords during playback, set TRANSPOSE to the key of C and then copy the phrase. 6. Select the pad button you wish to copy to. • On the PERFORMANCE PAD side, use the . and . buttons to make the corresponding settings. USER BANK: The name of the bank (A/B/C). PAD: Pad button number (1 to 6). PART: The part to copy to. 7. Use the TRACK . and . buttons to select the SEQUENCER track number to copy from. • If there is CHORD data, it is automatically selected. 8. Press the OK button. • A confirmation display appears. Press the YES button if you wish to copy the phrase, or press the NO button to cancel the procedure. 9. When you have completed the procedure, press the PROGRAM MENUS button to turn it off. Piano PerformancePads 58 QQTG0665 Part III Piano Performance Pads (PR804) Compile You can assign desired phrases from different banks in “Compile Bank” 1 and 2. 1. Press the PROGRAM MENUS button to turn 3. Select COMPILE SET. it on. • The display looks similar to the following. PROGRAM MENUS • The display looks similar to the following. • You can press the NAMING button and assign a name to the bank. 4. Press the BANK button to select a bank (Compile Bank: 1/2). 5. Use the PADS and buttons to select the pad to which to assign the phrase. 6. Use the BANK and PHRASE . and . buttons to select the desired bank and phrase you wish to assign. • The “Control” bank cannot be selected. 7. Repeat steps 5 and 6 to assign phrases to the other pad buttons. 8. When you have finished assigning the phrases, turn off the PROGRAM MENUS button. 2. Select PIANO PERFORMANCE PADS. • The display looks similar to the following. Record a phrase “User Bank” A, B and C are reserved for storing your original phrases. 1. Press the PROGRAM MENUS button to turn it on. • The display looks similar to the following. 2. Select PIANO PERFORMANCE PADS. • The display looks similar to the following. 3. Use the buttons to the left of the display to select a RECORDING BANK. • The display changes to the RECORD PAD display. • You can press the BANK NAMING button and assign a name to the bank. • If the BANK CLR button is pressed, all the data in the bank is cleared (a confirmation display appears). 4. Use the buttons below the display to select the pad number to record. • The display changes to the PAD RECORDING display. • You can press the PAD NAMING button and assign a name to the bank. • To clear all the current data in the selected pad, press the CLEAR THE PAD button, and then press the YES button on the confirmation display. 5. Use the MEAS . and . buttons specify the number of measures in the phrase. Use the TIME SIGNATURE . and . buttons to specify the time signature of the phrase. • This step is possible only if the CLEAR THE PAD procedure was executed. (continued on the next page) 59 QQTG0665 Piano PerformancePads Part III Piano Performance Pads (PR804) 6. Press the OK button. • For details about KEY SETTING, refer to page 87. • For details about CHORD MODIFY CHANGE, refer to page 88. 7. Select the part to record to. • Press the button for PART 1 or PART 2. • Recording begins as soon as the pad is selected. • Two parts can be recorded (PAD 1–4). • The display looks similar to the following. • Refer to page 89 for detailed information about PART SETTING. 8. Proceed to record. • The recording procedure is the same as for the COMPOSER. (Refer to page 85.) • When played back by the AUTO PLAY CHORD, the recorded phrase will be played in the specified chord. • In the PLAY SETTING, if LOOP is set to OFF, LOOP recording is not possible. PLAY SETTING Select a playback mode. 1. On the PAD RECORDING display, press the PLAY SETTING button. • The display looks similar to the following. 2. Use the START . and . buttons to select a playback mode. SYNCHRO: During a rhythm performance, the phrase playback begins in time with the beat. INSTANT: The phrase starts to play immediately when the pad button is pressed, regardless of the rhythm. 3. Use the LOOP . and . buttons to enable or disable loop ...

Baixe o seu

Para fazer o download, introduza 2 dígitos :