|
por este dispositivo também tem outras instruções :
Facilidade de uso
• Be sure to tighten all screws upon completing assembly of each unit. • To disassemble, reverse the assembly sequence. Remove all parts other than the main unit from the box. Confirm that all parts shown in the illustration are provided. Do not remove the main unit from the box prior to step 3. 1 Attach the legs to the speaker box. 1-1 Attach the leg (L) to the side of the speaker box using three short screws (6 x 20 mm). 1-2 While pressing the bracket on the leg against the speaker box, securely tighten the screws that were attached. 1-3 Follow the same steps to attach the leg (R). 1-4 Raise the speaker box. 2 Detach the speaker net. 2-1 Remove the two screws. These screws are used in step 6. 2-2 Detach the speaker net. 3 Mount the main unit. 3-1 Mount the main unit on the speaker box while aligning the rear of the main unit with the rear of the speaker box, and each lateral side of the main unit with the lateral side of the legs. Have a Phillips-head (+) screwdriver of the appropriate size ready. Main Unit Leg (L) Leg (R) 6 . 30 mm long screws . 10 6 . 20 mm short screws . 6 Speaker box AC power cord . 1 Be sure to lay the packaging sheet or other protective sheet on the floor and under the instrument. 1-1 1-2 CAUTION Be careful not to pinch your fingers when mounting the main unit. Do not hold here. 2-2 2-1 Hold here. Assembling the Unit 38 • N1 Owner’s Manual 3-2 Move the main unit slightly toward the rear side, then adjust its position so that the projecting pin on the metal brackets on the bottom of the main unit will lock into the notch on the metal brackets of the legs (L/R). 4 Secure the main unit. Secure the main unit using ten long screws (6 x 30 mm). 5 Connect the speaker cord and pedal cord. 5-1 Remove the vinyl tie attaching the speaker cord and pedal cord. 5-2 Insert the speaker cord plug into the connector so that the tab extends toward the front when viewed from the rear. 5-3 Insert the pedal cord plug into the pedal connector in the correct orientation. 5-4 Use vinyl ties to bundle the speaker cord and pedal cord. 6 Attach the speaker net. 6-1 Attach the speaker net. 6-2 Affix the speaker net with the screws unloosed at step 2. 7 Insert the AC power cord plug into the AC INLET. For models that feature a voltage selector: Set the voltage selector to an appropriate voltage. 8 Rotate the adjuster until it comes in firm contact with the floor surface. Connecting the pedal cord Insert the pedal cord securely until the metal part of the cord plug disappears from view. Otherwise, the pedal may not function properly. 5-1 5-4 5-1 5-4 5-2 5-3 . After completing the assembly, please check the following. • Are there any parts left over? . Review the assembly procedure and correct any errors. • Is the instrument clear of doors and other movable fixtures? . Move the instrument to an appropriate location. • Does the instrument make a rattling noise when you shake it? . Tighten all screws. • Is the power cord inserted securely into the sockets? . Check the connection. • If the main unit creaks or is otherwise unsteady when you play on the keyboard, refer to the assembly diagrams and retighten all screws. 240 127 110 220 Specification s Size/Weight Dimensions Width Height Depth 1,465mm (57-11/16") 995mm (39-3/16") With music rest: 1,170mm (46-1/16") 618mm (24-5/16") Weight 124kg (273lbs., 6oz) Control Interface Keyboard Number of Keys White Black Touch Sensitivity 88 (A-1–C7) Acrylic resin Phoenolic resin Fixed/Soft/Medium/Hard Sensor System Hammer Sensors Key Sensors Non-contact optical fiber Non-contact optical fiber Pedal Number of Pedals Half Pedal Functions 3 Yes Damper (with half-pedal effect), Sostenuto, Soft Cabinet Fallboard Yes Music Rest Yes Voices Tone Generation Tone Generation Technology Stereo Sustain Samples Key-off Samples String Resonance Spatial Acoustic Sampling Yes Yes Yes Polyphony Number of Polyphony (Max.) 256 Preset Number of Voices 5 Effects Types Reverb Yes Songs Preset Number of Songs 10 preset songs, 5 voice demo songs Recording Number of Songs Number of Tracks 1 song (300KB; approx. 30,000 notes) 1 Functions Overall Controls Metronome Tempo Transpose Tuning Scale Type Yes Yes Yes Yes 7 types Connectivity Connectors MIDI Headphones AUX IN AUX OUT USB TO DEVICE IN/OUT PHONES x 2 [L/L+R] [R] [L/L+R] [R] Yes Amplifiers and Speakers Amplifiers 25W x 1 + 30W x 5 Speakers 8cm x 3 + 13cm x 2 + 16cm x 1 Accessories Included Accessories Owner’s Manual, AC Power Cord, Felt Key Cover, Bench (included or optional depending on locale), My Yamaha Product User Registration * Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. Optional Accessories Headphones HPE-160 USB-MIDI Interface UX16 N1 Owner’s Manual • 39 Index A AC IN......