Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
5 Make sure that the port is shown below the device that was found. (This will be a name such as USB-MIDI.) Check the check box for the port, and then click the [OK] button. 6 A dialog box will appear, allowing you to name the file that will be saved. Input the desired filename, and click [Save]. This completes the OMS setup. 7 From the “Studio” menu, choose “Test,” and click the port icon. If a channel sounds on the MIDI instrument, the system is operating correctly. For details on using OMS, refer to “OMS_***_Mac.pdf,” included with OMS. 8 Acrobat Reader/File Utility/YAMAHA USB MIDI Driver INSTALLATION GUIDE Troubleshooting The driver cannot be installed. • Is the USB cable connected correctly? > Check the USB cable connection. > Disconnect the USB cable, then connect it again. Windows • Is the USB function enabled on your computer? > When you connect the MIDI instrument to the computer for the first time, if the “Add New Hardware Wizard” does not appear, the USB function on the computer may be disabled (see pages 3, 4). Perform the following steps. 1 Select [Control Panel] > [System] > [Device Manager] (for Windows 98/Me), or select [Control Panel] (Windows XP: Classic View) > [System] > [Hardware] > [Device Manager] (for Windows 2000/XP). 2 Make sure that no “!” or “x” marks appear at “Universal serial bus controller” or “USB Root Hub.” If you see an “!” or “x” mark, the USB controller is disabled. For more information, refer to the owner’s manual of your computer. Windows • Is any unknown device registered? > If driver installation fails, the MIDI instrument will be marked as an “Unknown device,” and you will not be able to install the driver. Delete the “Unknown device” by following the steps below. 1 Select [Control Panel] > [System] > [Device Manager] (for Windows 98/Me), or select [Control Panel] (Windows XP: Classic View) > [System] > [Hardware] > [Device Manager] (for Windows 2000/XP). 2 Look for “Other devices” in the menu “View devices by type.” 3 If you find “Other devices,” double-click it to extend the tree to look for “Unknown device.” If one appears, select it and click the [Remove] button. 4 Remove the USB cable from the MIDI instrument, and make the connection again. 5 Install the driver again. > Windows 98/Me users > Windows 2000 users > Windows XP users See page 3. See page 4. See page 5. When controlling the MIDI instrument from your computer via USB, the MIDI instrument does not operate correctly or no sound is heard. • Did you install the driver? > Windows users See page 3. > Macintosh users See page 6. • Is the USB cable connected correctly? • Are the volume settings of the tone generator, playback device, and application program set to the appropriate levels? •Have you selected an appropriate port in the sequence software? • Are you using the latest USB MIDI driver? > The latest driver can be downloaded from the following web site. Playback response is delayed. • Does your computer satisfy the system requirements? • Is any other application or device driver running? Macintosh > Turn off virtual memory. > Disable AppleTalk. Cannot suspend or resume the computer correctly. • Do not suspend the computer while the MIDI application is running. • If you are using Windows 2000, you may not be able to suspend/ resume normally, depending on the particular environment (USB Host Controller, etc.). Even so, simply disconnecting and connecting the USB cable will allow you to use the MIDI instrument functions again. How can I delete or re-install the driver? Windows Me/98 1 When the MIDI instrument is recognized correctly, double- click “System” in the Control Panel to open the System window. 2 Double-click the “Device Manager” tab, select “YAMAHA USB MIDI Driver” and delete it. 3 Use the MS-DOS prompt or Explorer to delete the following three files. • \WINDOWS\INF\OTHER\YAMAHAMIDI instrument. INF • \WINDOWS\SYSTEM\Xgusb.drv • \WINDOWS\SYSTEM\Ymidusb.sys •To delete the above files using Explorer, select “Folder Options” from the Tool (View) menu, and select “Show all files (and folders).” 4 Disconnect the USB cable. 5 Restart the computer. 6 Re-install the driver (see page 3). Macintosh 1 Delete the files in the following locations: • [System Folder] > [Control Panels] > [YAMAHA USB MIDI Patch] • [System Folder] > [Extensions] > [USB YAMAHA MIDI Driver] • [System Folder] > [OMS Folder] > [YAMAHA USB MIDI OMS Driver] 2 Restart the computer. 3 Install the driver (see page 6) and set up OMS (see page 7). Acrobat Reader/File Utility/YAMAHA USB MIDI Driver INSTALLATION GUIDE 9 English English The following is a legal agreement between you, the end user, and Yamaha Corporation (“Yamaha”). The enclosed Yamaha software program is licensed by Yamaha to the original purchaser for use only on the terms set forth herein. Please read this licensing agreement with care. Opening this package indicates that you accept all terms outlined herein. If you do not agree to the terms, retu...