Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
NOTE ON/OFF Data format: [9nH] -> [kk] -> [vv] 9nH = Note ON/OFF event (n = channel number) kk = Note number (Transmit: 09H–78H = A-2–C8 / Receive: 00H–7FH = C-2–G8) vv = Velocity (Key ON = 01H–7FH, Key OFF = 00H) Data format: [8nH] -> [kk] -> [vv] (reception only) 8nH = Note OFF event (n = channel number) kk = Note number: 00H–7FH = C-2–G8 vv = Velocity 2. CONTROL CHANGE Data format: [BnH] -> [cc] -> [vv] BnH = Control change (n = channel number) cc = Control number vv = Data Range (1) Bank Select ccH Parameter Data Range (vvH) 00H Bank Select MSB 00H:Normal 20H Bank Select LSB 00H...7FH Bank selection processing does not occur until receipt of next Program Change message. (2) Modulation (reception only) ccH Parameter Data Range (vvH) 01H Modulation 00H...7FH (3) Main Volume ccH Parameter Data Range (vvH) 07H Volume MSB 00H...7FH (4) Panpot (reception only) ccH Parameter Data Range (vvH) 0AH Panpot 00H...7FH (5) Expression ccH Parameter Data Range (vvH) 0BH Expression MSB 00H...7FH (6) Damper Pedal/Sustain ccH Parameter Data Range (vvH) 40H Sustain MSB 00H...7FH (7) Sostenuto (reception only) ccH Parameter Data Range (vvH) 42H Sostenuto 00H...3FH:off, 40H...7FH:on (8) Soft Pedal (reception only) ccH Parameter Data Range (vvH) 43H Soft Pedal 00H...3FH:off, 40H...7FH:on (9) Portamento Control (reception only) ccH Parameter Data Range (vvH) 54H Portamento 00H...7FH (10) Effect1 Depth (Reverb Send Level) ccH Parameter Data Range (vvH) 5BH Effect1 Depth 00H...7FH Adjusts the reverb send level. (11) Effect4 Depth (Variation Effect Send Level) ccH Parameter Data Range (vvH) 5EH Effect4 Depth 00H...7FH (12) RPN 65H RPN MSB 64H RPN LSB 06H Data Entry MSB 26H Data Entry LSB 60H Data Increment 61H Data Decrement * Parameters that are controllable with RPN: • Coarse Tune • Fine Tune • Pitch Bend Range 3. MODE MESSAGES Data format: [BnH] -> [cc] -> [vv] BnH = Control event (n = channel number) cc = Control number vv = Data Range (1) All Sound Off ccH Parameter Data Range (vvH) 78H All Sound Off 00H (2) Reset All Controllers ccH Parameter Data Range (vvH) 79H Reset All Controllers 00H Resets controllers as follows. Controller Value Pitch bend ±0 Modulation 0 (OFF) Expression 127 (Max) Sustain 0 (OFF) Portamento Control Cancels the Portamento Source. Key Number that was received. RPN Number not specified; internal data will not change. (3) Local Control (reception only) ccH Parameter Data Range (vvH) 7AH Local Control 00H (off), 7FH (on) (4) All Notes Off ccH Parameter Data Range (vvH) 7BH All Notes Off 00H Switches OFF all the notes that are currently ON on the specified channel. Any notes being held by the sustain or sostenuto pedal will continue to sound until the pedal is released. (5) Omni Off (reception only) ccH Parameter Data Range (vvH) 7CH Omni Off 00H Same processing as for All Notes Off. (6) Omni On (reception only) ccH Parameter Data Range (vvH) 7DH Omni On 00H Same processing as for All Notes Off. (7) Mono (reception only) ccH Parameter Data Range (vvH) 7EH Mono 00H Same processing as for All Sound Off. (8) Poly (reception only) ccH Parameter Data Range (vvH) 7FH Poly 00H Same processing as for All Sound Off. • When Control Change is turned OFF, Control Change messages will not be transmitted or received. • Local on/off, OMNI on/off are not transmitted. (The appropriate note off number is supplied with “All Note Off” transmission). • When a voice bank MSB/LSB is received, the number is stored in the internal buffer regardless of the received order, then the stored value is used to select the appropriate voice when a program change message is received. • Poly mode is always active. This mode will not change when the instrument receives a MONO/POLY mode message. P-35 MIDI Reference / MIDI-Referenz / Reference MIDI / Referencia MIDI 2 MIDI Data Format / MIDI-Datenformat / Format des donnees MIDI / Formato de datos MIDI MIDI Data Format / MIDI-Datenformat / Format des donnees MIDI / Formato de datos MIDI PROGRAM CHANGE Data format: [CnH] -> [ppH] CnH = Program event (n = channel number) ppH = Program change number P.C.#=Program Change number Voice Name MSB LSB P.C.# GRAND PIANO 1 0 122 1 GRAND PIANO 2 0 112 1 E. PIANO 1 0 122 6 E. PIANO 2 0 122 5 PIPE ORGAN 1 0 123 20 PIPE ORGAN 2 0 122 20 STRINGS 0 122 49 HARPSICHORD 1 0 122 7 HARPSICHORD 2 0 123 7 VIBRAPHONE 0 122 12 • When program change recepti...